Microtek Office Equipment & Supplies - Page 3 - Recent Questions, Troubleshooting & Support
I cant use my scanner..i need to install
Step 1. Install Microtek ScanWizard 5
Install the ScanWizard 5 scanner driver (included in your Microtek CD-ROM) as instructed in the Installing and Getting Started booklet(a separate document that came with your scanner package).
For ScanWizard 5 to work properly after installation, the correct scanner model should be properly connected to your host beforehand and it needs to be "powered on" before launching the software.
5/9/2017 6:40:16 PM •
Microtek...
•
Answered
on May 09, 2017
I cannot install my microtek scanner 3840 to my
1> attach scanner with your PC
2> open device manager
3> Power on your scanner
4> see the imaging device (USB1200 Scanner) on device manager
5> install Microtek Scanwizard sofrware cd with win_xp support
6> when installed the driver reboot your pc or manual reoot later
7> run the scanwizard and scanner is working.
5/9/2017 6:37:18 PM •
Microtek...
•
Answered
on May 09, 2017
Cleaning inside of glass scanmaker 4800
OK Just Stupid (G).... Open the lid, pull it up and off and you will see two screws below the hinges. If you have decided to purchase another scanner already, you are clear to proceed. Take these out, pry the halves apart until you hear a click. Push the upper section toward the control panel and the will come apart like a freshly caught oyster.
I would not only clean the inside of the glass, but would get a can of compressed air and blow the heck out of the area below the black thing. This should get most of the dust off of the mirrors (3).
I took mine apart and cleaned them, but, if you had problems opening the case, I definately would not try taking this assembly apart. It'll make you cuss.
7/23/2016 8:46:50 PM •
Microtek...
•
Answered
on Jul 23, 2016
My scanmaker 3600 doesn't work
There's no driver for Windows 7, But you still can install it so it can work by install the driver for Windows XP in "Compability Mode". here's the steps :
1. Place the applications installation file on the Desktop.
2. Right Click the applications installation file and select Properties/Compatibility Tab. Select "Windows XP"
3. Click Apply/OK.
4. Right Click the file and select the Run As Administrator option to install.
cheers
2/8/2016 8:55:55 PM •
Microtek...
•
Answered
on Feb 08, 2016
Not finding what you are looking for?