Micro Innovations Recent Questions, Troubleshooting Help & Support

I got one at a garage sale for a buck. Came here for a solution, but still couldn't get it open. I figured it out by breaking it!. Bad for me, good for you. I pried off the black cover and broke off a little tab. I'll explain how it works. Behind the two buttons there is a silver half oval. When you push down on the end of that half oval that's the farthest away from the mouse wheel, it pushes down on a little tab that is part of the black cover, and lets that tab clear a piece of plastic that it clips under. I broke off that tab by prying it. So, push down hard on the END of that little half oval and at the same time slide the black cover back. The mouse uses two AAA batteries. Good luck. That's the solution. Guaranteed!

try to download driver http://tags.topshareware.com/volcano-webcam-ic-100-driver/downloads/1.htm

For the Manual and Driver for Windows 98/ME/2000/XP

http://www.visioneer-europe.com/primascan/support/icam320.htm

Product Specification 100k Pixel / Colour CMOS Sensor
USB Interface with 2 metre cable
Manual Focus - 2 inches to infinity
Field of View Angle - 45°
Tilt Angle: Up to 20.4° / Down 20.4°
I/F: Snapshot button and LED Status indicator
Frame Rate: Up to 30 fps @ CIF, 5.12 KB/sec USB Bandwidth
Still Image Capture: 160 x 120, 176 x 144, 320 x 240, 352 x 288
Video Recorder: 160 x 120, 176 x 144, 320 x 240, 352 x 288
S/W Driver: WDM & TWAIN for Win 98 & 2000
Compatible with Windows Millennium
Includes Built-In Microphone
System Requirements USB Port
Windows 98/2000/ME/XP
233 MHz Pentium Processor with MMX or faster
32MB RAM or greater
800x 600 / 24-bit display
CD-Rom driver
Windows compatible sound card with speakers
Internet Service Connection

i have one of those hubs the ac adapter is output +5V, and current 0.2 - 2.5A, inside of connector is pos(+), outside is neg(-), input: 100 - 120 Vac and 0.45A Max

There is one receiver unit. Check that you removed the piece of plastic between the battery and terminal in the keyboard. If it still does not work, remove the batteries and put them back. If it still fails, try plugging the receiver into another usb port

Return it, no sense in starting with a defective keyboard. If you need further help, reach me via phone at https://www.6ya.com/expert/john_3d2ab14f2fbdd36f

yes

here is the link you can down load it or just read it. https://www.gitbook.com/book/rediscagubath/ivso-bluetooth-keyboard-case-manual/details.

Find the website that made the mouse and download the driver from there, or go into your device manager and update the mouse driver