Mercury Recent Questions, Troubleshooting Help & Support

Question edited for clarity and what I think you thought you were saying. Question moved to model category. The one on the bottom is the Drain Plug. The one on the side is the Fill / Level Plug.

Disconnect the negative battery terminal for 15 minutes. Make sure the old key is in the ignition. Or an auto electrician, auto locksmith, or an alarm installer can do it using a scan tool computer. https://www.google.com/search?q=mobile+auto+electrician+near+me ..

There could be a few potential issues that could be causing the charging ports not to work on your 2005 Mercury Sable. Here are a few steps you can take to try to fix the problem:

1. Check the fuses: The first thing to check would be the fuses related to the charging ports. Your vehicle's owner's manual should have a diagram of the fuse box and a description of which fuses control which systems. If a fuse is blown, it will need to be replaced.
2. Check the wiring: If the fuses are in good condition, you should next check the wiring between the charging port and the vehicle's electrical system. Look for any loose or frayed wires, and repair or replace any damaged wiring as needed.
3. Check the charging port itself: The charging port itself could be the problem. Look for any visible damage or debris blocking the port, and clean it out if necessary. You can also try unplugging and re-plugging any devices that are connected to the port to see if that fixes the issue.
4. Have a professional inspect the system: If none of the above steps resolve the issue, it might be best to have a professional inspect the charging system. A mechanic or an auto electrician should be able to diagnose the problem and repair it for you.

Sounds like you did major steering system damage and drive system damage. You need to get it towed to a repair shop.

NO ENGINE TOLD OR VIN? ENGINE STARTS AND RUNS. PRNDL. WILL NOT MOVE REVERSE. OR LOW AND DEAD IN DRIVE.? SHIFT LINKAGE BUSTED, IS FIRST.

1. Locate the linkage that connects the door handle to the door latch mechanism. You may need to detach it from the door handle.
2. Look for any other retaining clips or screws that are holding the door handle assembly in place.
3. If the door handle assembly is still not coming out, you may need to remove the interior panel to access the back side of the door handle assembly.
4. Once you have access to the back side, inspect the door handle assembly for any additional screws or clips that are holding it in place.
5. Once you have removed all screws, clips, and linkage, the door handle assembly should be able to be pulled out of the door.

If you are still unable to remove the door handle assembly, it is recommended to refer to the vehicle's service manua

loosen the 4 bolts that hold hood to hinges located on back of hood.

Here is your Fuse Box Diagram.

Mercury Grand Marquis (2003-2011) fuses and relays

https://fuse-box.info > mercury > mercury-grand-marq... The fuse box is located under the left side of the instrument panel. The location of the fuses in the passenger compartment: Mercury Grand Marquis (2003- ... https://www.google.com/search?q=2003+Mercury+Grand+Marquis.+Power+point+fuse+location ..

Question edited for clarity. Question moved to model category. help and a video https://www.google.com/search?q=2000+Mercury+Cougar+V6.+How+do+you+remove+and+replace+belt+tensioner ..

Guesswork 6 to 7 foot pounds https://www.google.com/search?q=1966+Mercury+S55+Torque+for+valve+covers ..

you have a bad headlight switch

It sounds like there could be a problem with the electrical system or fuel delivery. I suggest having a qualified technician take a look at your car to diagnose the issue and determine what needs to be done to fix it. It could be something as simple as a loose connection, or it could be something more complex such as an issue with the fuel delivery system or the ignition system.

NO STORY TOLD AT ALL, JUST REACTIONARY STEPS LATER. NOT TOLD AT ALL HOW ALL THIS STARTED.(A STORY) THE USERS GUIDE IS FIRST AND NOW i WILL READ IT TO YOU JUST SO YOU CAN FIND THE IMMO LAMP, ON THE DASH CLUSTER. FOR FREE https://www.fordservicecontent.com/Ford_Content/catalog/owner_guides/03sabog2e.pdf PAGE 68 COVERS THIS TOPIC SECURILOCK PASSIVE ANTI-THEFT SYSTEM Q1: DID YOU LOSE BOTH KEYS, ? AS DAY 1 NEW CAR HAD 2 KEYS. NEVER LOSE 1 OR BOTH. OR BE STRANDED, FOR SURE. BEST IS HAVE 3, SO 2 ALWAYS WORK. SEE WHY BELOW. DIY 2 KEYS MUST BE GOOD TO MAKE KEY 3 TO 8. THAT IS HARD FAST RULE,. IN THE GUIDE IF YOU READ IT. YOU CAN PROGRAM diy MORE KEYS CLUSTER LAMP IMMO , RULES When the ignition is in the ON position, the indicator will glow for 3 seconds, then turn off, to indicate normal system functionality. If a problem occurs with the SecuriLock
system, the indicator will flash rapidly or glow steadily when the ignition is in the ON position. If this occurs, the vehicle should be taken to an authorized dealer for service. 8 KEYS MAX SEE PAGE 70 FOR DIY SPARE KEYS MADE 9STEPS You must have two previously programmed coded keys (keys that already operate your vehicle's engine) and the new unprogrammed key(s) readily accessible PAGE 10 AND PHOTO BELOW. END BOOK WORDS HERE IS THE LAMP AND WHAT IT DOES AND MEANS IT CUTS SPARK IF NOT HAPPY. flashS rapidly or glow steadilY IS UNHAPPY IMMO IT TOLD YOU A DEALER ONLY FIX. OR CALL A LOCKSMITH, TO FIX IT BUT MOST CAN NOT IF ALL KEYS ARE DEAD.

NO HABLA

I'd give a call to a local auto scrap yard. You can get a price on a rear end and take it from there. Probably good idea to have the vin# handy too.

Question edited for clarity. Question moved to model category. There are two types of 'timing' camshaft and ignition. Lets guess you are talking ignition. https://www.google.com/search?q=1993+Mercury+Cougar+XR7+V8.+set+the+timing ..

The ballast wasn't the issue then, no new part would fail that quickly, just doesn't happen. You need to see a Ford dealer service department or a Ford savvy repair shop.

https://www.outilsobdfacile.com/location-plug-connector-obd/Mercury-grand-marquis-2

7 to 9 ft-lbs.....not much at all. DON'T over torque or you'll screw up the pan gasket.

#23 engine compartment is the location. If you need a new they are readily available at parts store. copy and paste https://fuse-box.info/mercury/mercury-sable-2000-2005-fuses-and-relays ..