Memorex Televison & Video - Recent Questions, Troubleshooting & Support


haha I have the same problem.

Memorex MVD2027... | Answered on Jul 12, 2020


Your Spectrum remote control may not contain the code. A common problem with cable systems.

Memorex... | Answered on Jul 04, 2020


First, ensure that the TV is set to the TV (either NTSC (analog) or ATSC (digital)). To do this, press the Source button until this is the highlighted source. (The Source button is the second from the left (as you face the set) on the top of the TV. There is also a source button on the remote above and to the right of the arrow keys.) Next press the Menu button (center of the arrow keys on the remote or the button just to the right of the Source button on the TV). Use the navigation arrows to navigate the menus. The Channel up/down buttons mimic those arrow keys on the remote. Press the Volume Up or right arrow to select an item. Next select Setup and go to Preset. Select this sub-menu and go to Reception. Select the item and then set the mode to TV for over-the-air. Set this to CATV for cable on the antenna RF input. Press Menu repeatedly to go back in the menu system. Return to the Preset section of the Setup menu. Navigate to the Auto Install and select this. Wait for the TV to scan all channels for either NTSC or ATSC depending on the current Source. Exit the menu and change the source to the other TV tuner. Repeat the steps to Auto Install to store channels for both the analog and digital tuners.

The manual is available from ManualsLib here: https://www.manualslib.com/manual/101765/Memorex-Mlt1912.html . See pages 5, 16 and 17 (pages 6, 17 and 18 as labeled by ManualsLib) for the screen shots and pictures of the remote control and front panel buttons for these steps.

Since there are only a few low-power NTSC stations still broadcasting, you may not find any stations when you scan for channels with NTSC as the source. Depending on the stations in your area, skipping the Auto Install step for NTSC may be appropriate. I hope this helps.

Cindy Wells

Memorex... | Answered on Jun 07, 2020


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
https://elektrotricks.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Type in the brand name of your device in the search box, and hit enter to get gathered related posts. See the website either in Webview with a mobile, or by a desktop computer. Mobile view has no search box in it.

Memorex... | Answered on Jun 03, 2020


Simply plug in the adapter to the HDMI port on your TV, connect it to Wi-Fi, and let the fun begin. Compatible with Android, iOS, MAC and Windows, the adapter is easy to use and makes your connected device your remote for simple control over what you're watching. Stream on!
https://www.menards.com/main/electrical/home-electronics/small-electronics/memorex-wireless-hdmi-streaming-device/mwd38b/p-1529821700089.htm

Memorex... | Answered on Apr 24, 2020


go into tv audio and change or change input or source

Memorex... | Answered on Apr 01, 2020


this could be a problem as simple as low rescurces when you are burning your disk or even maybe needing a new fresh install of Arcsoft, it has been known to happen, as always its a process of elimination. firstly make sure you minimise whats running when you are creating your dvd, if that doesnt help move to the next step. uninstall and reinstall Arcsoft, look into the settings and maybe increase the priority of Arcsoft also.
i hope this helps, thank you.

Memorex MVD2016... | Answered on Mar 06, 2020


Sounds like main digital board fault. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Memorex... | Answered on Feb 28, 2020


Regarding the problem with the sound on your DVD player, I would suggest you to make sure the audio cables (red and white) are connected properly to the TV and player.

Also, try using a different set of cables since those ones might not be working and this is why you are not getting audio. On the Memorex remote you will find a mute button, make sure it is not activated.

Memorex MVD2047... | Answered on Feb 13, 2020


Correction, it prob is the actual movie when it says "no disc". DVD sub formats have changed so much from when players first came out to today that it is like the difference between windows 95 and windows 7. A lot of the new movies will not play on the older players because it does not reconize the format. On the ones that it skips on, the player thinks it knows the format but doesnt have the compression right. Old players make good paper weights.

Memorex MVD2040... | Answered on Dec 05, 2019


Google (Memorex)(MLTD3222)(manual) without parens.

Memorex... | Answered on Sep 10, 2019

Not finding what you are looking for?
Memorex Logo

1,318 questions posted

Ask a Question

Usually answered in minutes!

Top Memorex Televison & Video Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

The Knight
The Knight

Level 3 Expert

76407 Answers

 Grubhead
Grubhead

Level 3 Expert

5700 Answers

Are you a Memorex Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...