MegaVision Computers & Internet - Recent Questions, Troubleshooting & Support

Try this link: https://www.badcaps.net/forum/showthread.php?t=34426

RU getting a digital signal?

Isn't it a VGA cable?(15 pins-3 rows of 5 pins,slightly staggered.There is a 15 pin D-sub connector(2 rows of pins)-usually for extending a joystick cord on a PC.

Can you write me your Exact Requirement or Else You search in Google your Keyword+Requirekeyword/?

They are available here:http://www.ccl-la.com/catalog/product_info.php?products_id=48

Did you try this monitor with another PC yet and also check the VGA cable?
Most failure in the LCD monitors are due to bad DC filter caps as you can see in my pictures here:
http://s807.photobucket.com/albums/yy352/budm/

You may want to learn more here in details if you are going to do DIY repair.

Basic LCD monitor and TV troubleshooting guide: http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide http://www.fixya.com/support/r7406380-tv_training_manuals Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you. Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

Try replacing the power cable. (assuming that the monitor has not lights when it turns off) After replacing the power cable if that doesnt work try a different outlet.
If there are lights try seeing if you can replace the data cable from the monitor to the computer. If that doesnt work then you will want to look into getting a replacement.