Maxwest Tablets & eReaders - Page 2 - Recent Questions, Troubleshooting & Support


You have to do a factory reset and scrub it clean

https://www.google.com/search?q=unlock+a+zeki+tablet

Tablets &... | Answered on Jul 16, 2020


Hello,

You can acess Android's devices using your email.
Miss more than 5 times the password and after that you should receive a warning about that error and a way to access tablet using your email. Just follow instructions.

Check here:
http://www.pcadvisor.co.uk/how-to/google-android/3424220/how-unlock-android-phone-tablet/

If this answer was helpful please rate it. Thanks

Tablets &... | Answered on Jul 16, 2020


The current Sling TV app requires Android 4.4 or higher. This is given in the requirements on the Google Play Store page for the app: https://play.google.com/store/apps/details?id=com.sling&hl=en . Scroll down to the Additional Information section.

I know that the Sling site claims that the app works with Android 4.0.3 on the Devices page. However, they haven't updated the site properly. On their help site, they call for KitKat 4.4. See http://help.sling.com/articles/en_US/FAQ/How-do-I-watch-Sling-TV-on-an-Android-Device-36/?l=en_US&c=Topics%3AWST_AYD_Android .

If you are prepared to tinker with your device (rooting the device or similar activities) so that you can side-load the app, one older version of the Sling app can be found here: http://www.apkmirror.com/apk/sling-tv-l-l-c/sling/sling-4-0-5-154-3-release/sling-television-4-0-5-154-android-apk-download/ . Other versions of the Sling app are also available; check the Min system requirements below the size of the download package. However, these versions may not communicate properly to the Sling server any more.

I wish that I had better news for you. (Note: I have never tried to install an older app on my Android device.)

Cindy Wells

Tablets &... | Answered on Jul 16, 2020


Hi there, If your tablet will power on, but won't boot up, then take a look through this:How to Factory Reset Your Android Phone or Tablet When It Wont Boot

If it won't power on at all, try out these instead:
What to Do When Your Android Phone or Tablet Wont Turn On
My Android Tablet Wont turn on Anymore And cant take the back off

If those do not help, then contact the manufacturer.

I post on behalf of HP.

Tablets &... | Answered on Jul 15, 2020


Make sure that the settings have wifi enabled and airplane mode off.
It needs a 2.4G 803.11n wireless connection to a router thant has DHCP enabled.

Tablets &... | Answered on Jul 14, 2020


You will be stuck in fastboot if you have failed to flash an img file. You will have to boot a boot.img file using fastboot then download the last update to get your tablet back to normal.
Download the following file onto your computer...
K1_A301_03_03_110829_US.zip
Then unzip on the computer. You will see a file named "boot.img". Make sure your tablet is connected to the computer and you have the fastboot binary. Then run the following command in the directory you just unzipped the file
fastboot boot boot.img
This will allow you to boot up your tablet but the bootloader will STILL be stuck in fastboot. Therefore you will have to update your system. Download the same file above into the Download directory of your tablet. Rename it to update.zip. Dowload the following XML file...
K1_A301_03_03_110829_US.xml
and rename it to update.xml (NOTE: the system file manager won't let you change the extension so just rename to "update". Power off the tablet. Then hold down the Volume + key and hold down power button until it comes on. That will boot the system into recovery and install the update. In a few minutes you will be restored and your tablet will work normally. NOTE: YOU MAY LOSE YOUR DATA and may have to reinstall your apps.
If your boot partition isn't a mess like mine was, you may be able to just flash the system partition from the above zip file by using...
fastboot flash system system.img
fastboot reboot
The key is that a fastboot flash must be successful in order for your device to boot normally.

Source: Lenovo

Tablets &... | Answered on Jul 14, 2020


If your tablet is wit Android system you can do a factory reset from the Android System Recovery menu. To go into the recovery menu, press and hold the Power On button and some other key (Volume Up, Volume Down, Home ). The combination is different for the different models.
When you are in the Android system recovery menu, use The Volume Up/Down keys for navigation and the Power button for confirmation.
Choose "wipe data / factory reset"

Tablets &... | Answered on Jul 14, 2020


Settings - General - Display and Brightness - Auto-Lock - set it to 5 minutes.

Not turning on is a whole other issue, but try that first.

Tablets &... | Answered on Jul 11, 2020


Look for your router address, select it and type the password.

Tablets &... | Answered on Jul 08, 2020


Check inside for a damaged/defective/incorrectly installed ribbon connector.

Tablets &... | Answered on Jul 04, 2020


on your settings go to wi fi settings turn it on




Tablets &... | Answered on Jul 03, 2020


You are talking about a generic Android software reset?
Google gives instructions here: https://support.google.com/android/answer/6088915?hl=en
Factory reset your Android device
  1. Open your device's Settings app .
  2. Under "Personal," tap Backup & reset. If needed, enter your PIN, pattern, or password.
  3. Tap Factory data reset Reset phone or Reset tablet. If needed, enter your PIN, pattern, or password.
  4. To erase all data from your device's internal storage, tap Erase everything.
  5. When your device has finished erasing, pick the option to restart.
  6. Set up your device and restore your backed-up data.
If you can't open your device's Settings app, you can try factory resetting your Android device using its power and volume buttons. We recommend seeing your manufacturer's support site for device-specific instructions.

Tablets &... | Answered on Jul 03, 2020


What product are you asking about. Also why do you need to know is it acting funny. The gpu is graphics processing unit. Its a chip on the board that controls the display and handels the graphics of the display. The most common gpu are generally not abel to be fixed. The gpu are soldiered to the board by a ball grid array and would have to be heated up with a hot air gun or a soldier reflow oven to reset the soldier joints under the chip. It is best done by some one with proper understanding of soldering. If done improperly it can destroy the product completely and would not be abel to be fixed at all.

Tablets &... | Answered on Jul 02, 2020


Recover Android Device in case of Forgot password/pattern ...

visihow.com/Recover...Forgot.../pattern_unlock_an_Android_device
To perform a Factory Reset, take the following steps: Turn off your Android device. Press and hold the "power", "volume down", and "camera" buttons simultaneously. Release the buttons once your Android device is powered on. Scroll using your "Volume up and down" button until you find the "Factory Data Reset" option.

Tablets &... | Answered on Jul 01, 2020

Not finding what you are looking for?
Maxwest Logo

3 questions posted

Ask a Question

Usually answered in minutes!

Top Maxwest Tablets & eReaders Experts

The Knight
The Knight

Level 3 Expert

76407 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18397 Answers

Are you a Maxwest Tablet and eReader Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...