Marantz Audio Players & Recorders - Answered Questions & Fixed Issues

I had the same fault (no front display but the amp worked) first check the +- 5 and 12 volts if they are low say 11.90v or 4.95v have a look at the main power circuit board for dry joints. On mine I found the main plug from the transformer had one on the end pin. But why you have it out solder all the other joints on the board. It took about 2hr from start to finish. Good luck RP.

CD/DVD players use a protocol; Open tray. Insert disk. Tray switch tells mechacon that the tray is shut. Attempt to focus on disk. If focus is acheived, then it will spin up and try to read the disk otherwise it will ask for a readable disk. If the tray keeps opening, I would suspect the tray detect switch is malfunctioning, maybe the drive belt has stretched.

Yes. Most probably belt is broken. Download the service manual from given link and replace the belt as per procedure given in the manual. Marantz TT-4000 Service Manual, Service Manual, Repair Schematics (electronica-pt.com)

This is very strange the Service Manual is free and everywhere, but on the Marantz website if you scroll down to the bottom there are dozens of SR- Models in the AV Receivers category but it completely overlooks the SR-66, but there is an SR-6006! https://www.marantz.com/en-us/support/product-archive%C2%A0 It exists though https://www.hifi-review.com/149388-marantz-sr-66.html I would contact Marantz Support. https://www.google.com/search?q=Marantz+SR-66+owner%27s+manual ..

Question edited for full 'make model (what it is). Question moved to Marantz. It is very old, but help here https://www.google.com/search?q=Marantz+Cc870+manual ..

Hold the 'display' and 'zone select' buttons, then press power. Display should blink all segments. Let go of buttons, and your good to go

It is a nice gift! Specs state Multi-Room Speaker Out Assignable Surround Back Speakers as for Zone 2 Speaker A/B Yes Looks like Page 47 of the manual onwards

SR5005

Marantz https://www.marantz.com > sr5005_u_en_ug_v00 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 91 pages

Marantz SR5005 User Manual - ManualsLib

ManualsLib https://www.manualslib.com > ... > Receiver > SR5005 View and Download Marantz SR5005 user manual online. AV Surround Receiver. SR5005 receiver pdf manual download.

My PMD560 had a flat CR2032 which gave me continual card errors. I swapped it out and good as gold again.

No, it is a Surround Sound Receiver for taking television signal, or a signal from another device and amplifying it to multiple speakers.. https://www.google.com/search?q=Marantz+SR+68 ..

Moved you from cars to Maranze there is 1982 sections here. PM420 if all inputs fail the PA amp is bad check fuses check if speak wires are shorted. or speakers. if not that ,parts inside gave out. 39 years old, caps in side are bad (best statistics)

The Marantz NR1607 is an AV Receiver, and the CY920 error code is not a recognized error code for this product. It's possible that this is a custom or specific error code for your device, and I would recommend contacting Marantz support or the manufacturer for more information. They may be able to provide you with a solution or more information on what the error code specifically means and how to resolve it.

Question edited for its proper name and model designation.Question moved from Cars and Trucks to a Marantz category.Check fuses. Take it in for repair.https://www.google.com/search?q=marantz+sr6006+subwoofer+connection..

Parece que el problema puede estar relacionado con la fuente de alimentaci?n de su dispositivo. Es posible que desee verificar si la fuente de alimentaci?n proporciona el voltaje y el amperaje correctos. Adem?s, es posible que desee verificar si hay conexiones sueltas que puedan estar causando una interrupci?n en la fuente de alimentaci?n. Tambi?n puede intentar restablecer el dispositivo a su configuraci?n de f?brica para ver si eso resuelve el problema. Si estas sugerencias no funcionan, es posible que deba consultar el manual para obtener pasos de soluci?n de problemas m?s detallados o ponerse en contacto con un t?cnico calificado para obtener ayuda.

1. Hardware issue: The CD player may have a hardware issue, such as a damaged laser or faulty electronics, that is preventing it from reading normal CDs.
2. Firmware issue: The CD player's firmware, which is the software that controls the device, may be outdated or corrupt, causing it to only read Super Audio CDs.
3. Compatibility issue: The CD player may not be compatible with normal CDs, and is only able to read Super Audio CDs due to their specialized format.

In terms of adjusting the laser pick-up, it is generally not recommended to try to adjust the laser pick-up yourself, as it can be a delicate process that requires specialized equipment and knowledge. If you believe the issue may be related to the laser pick-up or other hardware, it may be necessary to seek the assistance of a qualified technician or the manufacturer. If the CD player is unable to read the content of a normal CD and is returning to 00:00 tracks on the display, it is possible that the issue may be related to the laser pick-up or other hardware. It is also possible that the issue may be related to internal ICs or other electronics, in which case it may be necessary to diagnose the issue further to determine the cause and find a solution.

Can you please repost this download link? I have corrupt firmware on a marantz 1602.
Thanks!

Have you tried a new cable?

Hi 3303k

Strange dramas you are having there. I would suggest first, that you switch the unit off overnight(unplug at the wall) to allow for a fulll hard reset. Then fire it up in the morning again, and see if it behaves itself. I found a user manual for you online here

It is a good amp that you have, and hopefully resetting it will sort it out for you. If not, please do get back to me here and we shall look deeper..

Thanks for using FixYa, a FixYa rating would be great for looking into this for you. Happy to help further :)

regards
robotek

From the description you have a microprocessor control problem, the only thing I can suggest is unplug everything from the amp, including speaker wires, and anything that is hooked to it, remove plug from wall receptical and let the amp sit for 30 minutes in a effort to get the processor ic to reset. If there is no change you will need a professional to resolve this issue and I recommend a estimate.

NOT A CAR/TRUCK SO MOVED TO AVR THE AVG. AVR HAS OVERLOAD DETECTOR AND LAMP AND RELAY THAT FAILS WHEN OVERLOADED. PER THIS SIMPLE LIST

1. SPEAKER WIRES SHORTED.ENDTO END
2. SPEAKER SHORTED.
3. TOO MANY SPEAKERS WIRED IN PARALLEL.(THE ohms rule violated)]
4. the amps side is failing.
5. the overload detector is bad, telling lies, and shutting it down.
6. try no speakers, to see if it trips.
7. It is 1999 and is old. even bad caps inside now.

only does Digital inputs: coaxial, optical Video Connections: component, composite, SVHS the rig has fan sensor failure and over temp too, and the service manual covers that. see protector DRIVE here, it shuts down all outputs via relays. free to read and DL. https://www.manualslib.com/manual/1066247/Marantz-Sr-18-U.html?page=6#manual

2002 made, a 20 year run, not bad for any old AMP.fuses good?????? yes.I got confused in the first post gee I can hear it? but yes the AMP works plays music etc, not told and only tone fails, just that, and we know why.source direct button is pushed in,OOPS now tone is dead by DESIGNif still fails we check all DC supplies to tone board 7000and clean all switch and relay contacts with electronics spray cleaner as we fully cycle each switch.or pay others huge cash (bread) to do those 2 simple acts.your call !usershttps://www.manualslib.com/manual/99021/Marantz-Pm7200.html?page=7&term=ohm&selected=3#manualservicehttps://www.manualslib.com/manual/837384/Marantz-Pm7200n1b.html