Marantz Office Equipment & Supplies - Recent Questions, Troubleshooting & Support

Try resetting the receiver by unplugging it for a minute, then plug back in. Here is a link to the Marantz support website: http://marantz.custhelp.com/app/answers/detail/a_id/99/session/L3RpbWUvMTQzMDc1MzA5Mi9zaWQvdkM1aWd2bG0%3D

It helps to understand how these critters work when a problem arises. Here is a link that explains DLP: Digital Light Processing

screen tube /supply are defected

It's getting to hot. Needs a cooling fan. Too many speakers or too high a volume. Let it cool. Should restart. If you unplug it,you will lose your presets.

If you need an analogue output, you can tap stereo analogue audio by using one of the two sets of "pre-out" RCA jacks on the back of your receiver. These provide "headphone like" output power, and will not overload any analogue input connected to it EXCEPT MIC and PHONO inputs on the 2nd device. If it's digital audio output you need, there's an HDMI monitor out, that will provide digital audio to another HDMI input equipped device. You'll have to get a relatively cheap adaptor if you need this digital audio output in another digital format/connection (like the popular S/PDIF optical or coaxial).

Open up unit look for where socket plugs in solder bridge the part of the switch that opens when socket inserted

Check its audio output section circuit. Faulty components in it can cause this fault. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box. http://electronicshelponline.blogspot.com/

the lamp is a cheap one, you should purchase a original one we supply the Original lamps for projector since 2002 any questions, feel free to contact me We supply original projector lamp,bulb,accessories,Lcd panel,Lens,DMD chip,color wheel,motherboard,powersupply,ballast... with high quality and competitive price. have a nice day! Jerry,Lampdeng Limited

If what you meant was that the composite input is not working specially the video the fault is with the video processor in the input section. Unless a signal check is done the fault cannot be confirmed as it can also relate to a logic gate failure in the input selction.

HeloJust unplug the device and let it be at this state for about 1 horur or so. After that replug it and see whether it helps you. If not, check whether its cooling fan is working wnen you switch it ON. If not, the system must be resetted; and need a factory service. OK.

Helloyou want to set the Lamp timer after replacing the Lamp I thinks and posts this solution.[1] Connect the power cord into the AC socket of the projector.[2] To reset the Lamp timer; While simoultaneously hodking down "MENU, ENTERAND DOWNWARD Button" on the projector, press "POWER/ 'STANDBY/ON on the projector.* "LAMP 0000H" is displayed indicating that the Lamp Timer is reset.If you want anymore assistance from me, get me by FixYa. OK.