Marantz Logo

Marantz Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 601 Products
  • 5K Answers
  • 364K Views
0helpful
1answer

My marantz cdr300 keeps saying OPC error no matter

I get the same problem, and I use Maxell Music CDs as the recorder won't take anything else. Sometimes a message comes up saying, bad CD
10/11/2021 10:19:04 AM • Marantz CDR-300... • Answered on Oct 11, 2021
0helpful
1answer

I have a marantz sr7400 and I pushed the direct source button and now it won't come off direct source and there's no sound

Diconnect from power. Tip it on end and spray the button with Switch Cleaner (NOT WD40!). Operate it a few times and spray again. Leave it 15 minutes and switch it back on https://www.marantz.com/en-ca/product/av-receivers/sr7400 ..
10/9/2021 6:32:45 PM • Marantz Audio... • Answered on Oct 09, 2021
0helpful
2answers

I need an instuction manual

Getting replacement instruction manuals are quite easy. The best place to replace the instruction manual is from the website of the product manufacturer. Simply go to the website of the product manufacturer and from there check for the customer support page user manuals are usually filed and kept for download from this page.
Or you could simply type the product make and model in google and add manual to it. EG: Marantz SR685 user manual
Hope this solution has been helpful?
8/11/2021 8:21:20 PM • Marantz SR-685... • Answered on Aug 11, 2021
0helpful
1answer

I need a users manual for marantz SR685

Look here.
8/7/2021 8:27:45 PM • Marantz Audio... • Answered on Aug 07, 2021
0helpful
1answer

Marantz ST7001 Tuner - "Internal" Switch won't work

The 'click' may be a relay failing to operate correctly
8/5/2021 4:25:17 AM • Marantz... • Answered on Aug 05, 2021
0helpful
1answer

I have a Marantz ST100. Speakers not playing after making a loud POP sound.

Dried out electrolytic capacitor(s) shorted
8/2/2021 7:33:54 AM • Marantz Audio... • Answered on Aug 02, 2021
0helpful
1answer

Marantz SR5002 fail to standby mode, will not reset

Power supply failure
7/30/2021 3:46:17 AM • Marantz... • Answered on Jul 30, 2021
0helpful
2answers

How to factory reset marantz sr6006

Hope this helps: How to reset the SR6006 Microprocessor reset (p. 150 Owner's manual) - Press and hold the Zone Select/Display buttons while powering on the AVR ......release 4-5 seconds later Network reset - Press and hold the M-Dax/Display buttons (resets network card and does a microprocessor reset) If you need further help, reach me via phone at https://www.6ya.com/expert/timothy_c6f309c0f75b6f43
7/29/2021 1:49:45 AM • Marantz Audio... • Answered on Jul 29, 2021
0helpful
2answers

How to reset Marantz sr370 because it's standing on standby and can't do anything on it.Please help

Try pressing and holding the power, and tuner preset + and - buttons together for 10 seconds.
7/24/2021 5:33:56 AM • Marantz... • Answered on Jul 24, 2021
0helpful
2answers

Display Problem in Marantz DV8300 DVD PLAYER

Saldature interrotte nella griglia del display.
Ciao.
Schizz
7/17/2021 10:44:30 AM • Marantz DV8300... • Answered on Jul 17, 2021
0helpful
1answer

Converting a .voc file to a wav or mp3

You have the Creative labs own compression file there. There are several Programs that can convert this for you and many of them are free. If this is something you will be doing a lot of you might pay for a better designed program. If it is a one time thing go to this link http://www.partnersinrhyme.com/pc/pcConvert.shtml and download a free program to do the converting for you.

Although a lot of people say they can't find a program on there to fix their solution so, instead go to this site.
http://support.rcaaudiovideo.com/downloads.aspx?product=23
Down load the program and go from there.
If you are on a mac you can run windows from the program Parallels and then work it in the windows environment.

7/7/2021 11:34:50 AM • Marantz PMD670... • Answered on Jul 07, 2021
0helpful
1answer

Marantz SR4003 flashing red standby mode

Sir my marantz sr 4003 AV Receiver standby red light blinking last time surround mode and exit button pressed two times problem solved now two days on words again same problem please give me suggestions
6/28/2021 2:52:10 PM • Marantz SR4002 • Answered on Jun 28, 2021
0helpful
2answers

File conversion on Mac

Your card is probably PC formatted, which means your mac can read it but not write to it. Copy the files to your hard drive and convert from there!
6/26/2021 9:15:58 AM • Marantz PMD670... • Answered on Jun 26, 2021
0helpful
1answer

Hello, my Marantz sr-7005 left speaker only does not work, tried the sound test and no sound from left front speaker. All the rest is working. Please help.

Try switching the speakers over. If the sound now comes out of the faulty speaker the amp is faulty. If it doesn't the speaker is faulty. If you can't find a replacement speaker, then buy a new pair of speakers. Match the ohms found on either the unit or old speakers with the same. The watts of the speaker can be the same or higher than the original.
6/5/2021 3:18:00 PM • Marantz Audio... • Answered on Jun 05, 2021
0helpful
2answers

I'm having a problem with

I'd say you DO need to evaluate how the PSW is attached. I can't find the specific manual for it but the prescribed way for most subs that accept speaker level inputs (and HAVE speaker level output terminals) is run one pair of speaker outputs from the receiver to the sub and daisy-chain the Klipsh speakers from the sub.
3/25/2021 4:10:40 AM • Marantz SR-48... • Answered on Mar 25, 2021
0helpful
1answer

My marantz mo. sr3100 power supply circuit 4diodes rectifier at ac. incoming in read s2v18 blown out unable to find replacement with net or ecg please acvise, Seri Anlipan.

You can use any rectifier diodes at power supply section. Refer some circuits, and you will get an ides. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ https://elektrotricks.blogspot.com/
2/18/2021 11:15:00 AM • Marantz... • Answered on Feb 18, 2021
0helpful
2answers

My reciever has only one jack for the sub out but my klipsch sub has two jacks (left and right). how do i run the cable to set it up ?

Use a Y splitter , 1 RCA to 2 RCA OR simply connect just 1 RCA to ! RCA OR use a 2 RCA to 2 RCA from the receiver's pre out.
1/27/2021 5:15:50 AM • Marantz SR-19... • Answered on Jan 27, 2021
0helpful
1answer

CD 4000 player. Why doesn't the drawer stay open to load a CD?

The open/close drawer switch is dirty, clean it or needs replacing.
1/2/2021 11:40:41 AM • Marantz Audio... • Answered on Jan 02, 2021
Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Marantz Experts

The Knight
The Knight

Level 3 Expert

76795 Answers

 Grubhead
Grubhead

Level 3 Expert

5720 Answers

ray gallant

Level 3 Expert

73544 Answers

Are you a Marantz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...