Makita Drills - Recent Questions, Troubleshooting & Support


Some of the Makita 18v LXT tools require the BL1830 3.0AH battery and are designed that the 1.5AH battery will not fit.

Makita 18V LXT... | Answered on Jul 17, 2020


Did you check to see if the motor is even being energized.? If not check the switch. If yes, then check motor brushes.

Makita Drills | Answered on Jul 13, 2020


Go to MAKITA.com and under the heading Factory and authorized service centers type in your model number and you should be able to download a manual. I had a couple of these when I worked for Makita and when running they are great. Good Luck. Dave

Makita Tools 18V... | Answered on Jul 08, 2020


Snap on tools have a very nice cylindrical magnet about 1/4" diameter that will fit inside the end of the chuck. If you release the clamp it should pull out.

Makita Drills | Answered on Jun 04, 2020


The Mfg. website will have a list of authorized service centers and manuals & parts lists if you choose to replace it yourself. Use a digital camera and take photos as you take it apart.

Makita & 1/2... | Answered on Jun 03, 2020


you might have to hit it a couple times to loosen the chuck

Makita 12 Volt... | Answered on Jun 03, 2020


Is this a 110Volt version that you plugged into 220v?

There is a ceramic Fuse inside the unit that might be blown. It is the first thing on the circuit board near the power cord connection.

Open the unit up and post a photo of any burned components ?

Makita 2 Bl1830... | Answered on Apr 27, 2020


none of these answers help. you cant return old chargers to the store, and the poster said his battery charged on a different charger. i have the same problem with 2 makita battery chargers and need to know if there is a part inside the charger that can be replaced.

Makita 2 Bl1830... | Answered on Mar 16, 2020


Your share is the great knowledge I have gathered, you are an important person I admire, thank you run 3

Makita 2 Bl1830... | Answered on Mar 10, 2020


Your feedback helps me a lot, A very meaningful event, I hope everything will go well <a href="https://run3sonline.com/">run 3</a>

Makita 2 Bl1830... | Answered on Mar 10, 2020


134527-9 http://www.ereplacementparts.com/torque-limiter-assembly-p-54984.html?osCsid=h08big45jse6abdn6tcftrcnt6


How is the healt of this piece is it worn also the other part that will work together with this part must be replaced

Or hows the part connexion 221347-1 spiral bevel gear on the 152335-6 cilinder liner ?? i think its economic not interesting for repair because of the high prices. and the problem of discontinued parts in the prospect

Makita HR3851... | Answered on Jan 31, 2020


Hi there the solution for how to mod a DC18RA charger can be found here. The "how to" comes with pictures and descriptions and it should be easy to follow, and best of all it works :)


Makita 18V LXT... | Answered on Nov 25, 2019


What has happened is the hex part of the bit has twisted slightly making it hard to remove. What I would do if you are comfortable with partial disassembly is remove the quick release mechanish. There is a split ring that comes off first and then a washer and spring, next remove the outer collar and SMALL steel ball from side of chuck. I take a pick (dental tool) and push up or try and twist the stuck bit. Sometimes it takes while but usually this works. Let me know if I can try and help further.

Makita 18V LXT... | Answered on Aug 27, 2019


you can buy the part
exploded view says part 6
look simple ..?.the way in is undo the top casing
leave the motor section in place if possible
Makita 3700B Trimmer Parts

Makita Drills | Answered on Aug 24, 2019


7.2V LITHIUM-ION 1.0AH (BL0710)
The Makita 1.0Ah battery with a 30 minute charge time.

Lithium-ion (LXT) - Makita


https://www.makitauk.com/lithium-ion-lxt.html

Makita Drills | Answered on Aug 15, 2019


The brushes are probably wearing out. They can also smoke if they get dirt or something on them. You can take the drill apart and replace the brushes, but if they are just burned some, take some fine sand paper or emery cloth and polish the armature where they run and clean the brushes and reinstall.

Makita Drills | Answered on Aug 15, 2019

Not finding what you are looking for?
Makita Logo

1,044 questions posted

Ask a Question

Usually answered in minutes!

Top Makita Drills Experts

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

John Trevino

Level 3 Expert

1420 Answers

epangan29

Level 2 Expert

113 Answers

Are you a Makita Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...