Major Hardware & Accessories - Recent Questions, Troubleshooting & Support

Din rail timers and manuals appear on following link:

The manual is not specific how to confirm the program settings ... other than maybe connecting the load and seeing if it turns on-off as programmed.
Don't forget to reset timer before programming.

Major Hardware &... | Answered on Oct 27, 2019


Major Electrolux... | Answered on Jan 24, 2019

MTD8 is 240Volt din rail timer max load 15 amps
Copy following link to identify timer and download manual.

If you need further help, I’m available over the phone at

Major Hardware &... | Answered on Oct 17, 2012

you should be able to replace the knob from the front of the panel without removing the control panelit has a "D" shaft on the knob and shaft also has a "D" configuration too? right?

Major Ge Dryer... | Answered on Aug 18, 2011

its mounted on the side of the burner funnel just outside the ignitor bar area,if you still need a diagram of it and drawing you can see it at,type in the complete model number and on the left side of the next page that it tales you to, point and click on picture number 3, it will be in the lower right hand corner and will be part number 48 which is mounted on the burner funnel number 46,there is also a parts list below this and you can see the actual part by clicking on the part number 48

Major... | Answered on Feb 26, 2011


If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.

if you dryer is gas check out this gas no heat tip....

If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.

check out this electric no heat tip...



Major... | Answered on Feb 05, 2011

your unit lists three timers but i think your talking about the expensive one il list all three the first one is the one i think your looking for
Number: W10039480 Knob timer
Number: 8275308 Cover timer
Number: 8269526 all three of these are listed on this schematic as part numbers 16 for cover timer , 17 for knob timer and part number 5 as the main timer if you have any further questions message me back and please remember to rank how this opinion has helped in order for myself to continue helping people with there appliance situations Thanks again Rick

Major Whirlpool... | Answered on Jan 16, 2011

Here is a tip that I wrote about dryers and noises...

It will help you determine what is happening there...

Dryer Repair Squeaks, Grinding, Clicking and Knocking Noise



Major G/e Dryer... | Answered on Sep 29, 2010

Try Googling (avid)(2078km)(manual) without parens.

Hardware &... | Answered on Sep 20, 2020

the manual says each unit has a maximum load of 3 amps (abt 7 one hundred mini light sets). when ANY INDIVIDUAL outlet is overloaded,ALL lights will turn off and an outlet overload message (OL) will be displayed. To reset,unplug unit,then unplug some of the lights in the outlet that appears to be overloaded and plug unit back in

Hardware &... | Answered on Jul 25, 2020

It's important to make sure everything is okay with your boiler. That means that it turns on and works just fine when you want it to, and in the same way it should also turn off when it needs to be turned off.

Boilers not turning off might not be a problem in your home but there certainly are some homeowners who struggle with this issue. This issue needs to be fixed right away because boilers that won't turn off could increase the risk of overheating in your home. Not only that, but you'll also find yourself paying more since your boiler won't stop running.

You can check your boiler's thermostat and see if anything changes when you try to turn the temperature levels down. If nothing happens, you should contact an expert to check the thermostat. Hiring an expert offers many advantages. Your heating system professional will also look for other areas that could be causing the issue such as the valves, the programmer, and the intricate wiring inside the boiler. These areas require the skill of an expert that's why it's best to visit the website of I-Delta to get connected with a professional who will help you.

Hardware &... | Answered on Jul 11, 2020

I was just cleaning out a drawer and came across the instructions (two months after I worked through the setup!!). If you would like I can create two .jpg images and send them along. The original printing is pretty small. [email protected]


Hardware &... | Answered on Jul 06, 2020

Not finding what you are looking for?
Major Logo

12 questions posted

Ask a Question

Usually answered in minutes!

Top Major Hardware & Accessories Experts

ray gallant

Level 3 Expert

69232 Answers

Gene Haynes

Level 3 Expert

5391 Answers

Tom Chichester

Level 3 Expert

57301 Answers

Are you a Major Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides