Magic Mill Food Mixers - Recent Questions, Troubleshooting & Support


Hi REINO66, I suspect you (speed) Control Plate Assembly has gone bad and needs to be replaced.
The good news is that this can be fixed quite easily (OK, maybe with a little effort) by yourself if you are a DITY type person, feel adventurous, and your mixer is not under warranty. However, before you start to disassemble your mixer, be sure you have the Parts List manual on hand. If you're lacking one, you can download a PDF version from the KA website: http://www.kitchenaid.com/flash.cmd?/#/page/home.
Click on Customer Care>Locate Manuals & Guides> Enter the 6 character model number, in your case use K45SSW, and select the file listed under Parts List (1), K45SSWH0.pdf (341.41 KB). Check to ensure it matches your mixer model.
Turn to pages 6 & 7, titled: Motor And Control Parts, which provides an exploded view for the disassembly and reassembly of your mixer’s electrical components, along with all the parts. Find Illus. No. 25, Control Plate Assembly, Part No. 240904-2, which is the part that needs to be replaced.
As far as parts go, here are four potential vendors in no particular order: RepairClinic.com; mendingshed.com; searspartsdirect.com; partstore.com. Prices for the same part can vary widely between vendors, so do your comparison shopping.
Here are some links to several excellent websites that detail the disassembling/reassembly of a KA Mixer.
Between these three websites and their excellent pictures and descriptions and your Parts List manual, you should now be able replace your Control Plate Assembly.
Good luck and have fun. I hope this helps. Howard, Burke, VA
If this solution has helped you, please rate it, thanks! - hslincoln

Magic Mill DLX... | Answered on Dec 15, 2018


majicmill.com
You may be having a problem with the motor brushes and/or bearings.

Magic Mill DLX... | Answered on Jan 16, 2014


The manual is $10 from the manufacturer, you can order from the following link.
http://magicmillusa.com/index.php?event=product-detail&productid=51
Let me know if you need anything else.
Benjamin

Magic Mill DLX... | Answered on Nov 04, 2010


What is the make and model of your mixer?

If there is a possibility that some food could have dripped onto the pin, it could be creating problems with the mechanism. If you are able to remove the bowl, try the tipping the arm into a bowl of hot water in hopes of loosening up any food debris in the mechanism. Power cord disconnected of course. :-)
It is possible that there is a spring inside the mechanism that has failed. If this is the case, it will need to be disassembled for repair.

I look forward to hearing back from you regarding the make and model of your unit. :-)

Magic Mill DLX... | Answered on Apr 12, 2010


http://magicmillusa.com/items.php?category=26

Magic Mill DLX... | Answered on Sep 28, 2009


if you r using it for dough use the roller and scraper it works much better. But if u want to use the dough hook the holes in the middle is where the knob and stick in the arm go into to hold the hook inplace and it also goes in the hole on the side near the scraper hope this helps

Magic Mill DLX... | Answered on Apr 17, 2009

Not finding what you are looking for?
Magic Mill Logo

22 questions posted

Ask a Question

Usually answered in minutes!

Top Magic Mill Food Mixers Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

34000 Answers

john h

Level 3 Expert

23438 Answers

Are you a Magic Mill Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...