Magic Audio Players & Recorders - Page 4 - Answered Questions & Fixed Issues
My microphones don't connect to
hey all, althought the manual says to hold down '0' along with the power button, which didt work.
For me it worked by holding '2' then turning on the mic (pressing the power button).
So try all the numbers.
I have connected the Magic Sing to a HD TV and a
You need to connect directly the sound wire of your magic sing to your home theather while the video wire of your magic sing directly to your hdtv. If its difficult to do because of distance, buy an rca extension to extend your magic sing wire to make it reach to the other end.
We have too much echo is there some way to get rid
It depends on how close your mics are to your speakers that might be causing those feed backs.
Try and get your mics away from the speakers i think it will solve your problem.
If the problem still persists, get a mixer and an equalizer.that will help too.
Can't power ON...
See if the microphone connector wiggles. It shouldn't move, but if it does, the legs on the connector can snap inside.
Video works but no sound at all
yee..check if you connected phono cables and try turn on and off your telly. yellow-this is vision,,,red--right channel,,,white-left channef of your sound...try also in menu options
IT WONT WORK !
This is the support site:http://www.magicsing.com.ph/faq.html#5 Have you tried resetting to the default settings?
I did not use my mic for about 6 months. It was
If it is an adapter type power supply, you may need a new adapter. If this type of supply is left plugged into the wall over time it can burn out from overheating or transients in the power etc. Also it appears that these have rechargeable batteries in them. Have you tried putting double A batteries in the battery compartment if there is one? The website is :http://www.magicsing.com.ph/faq.html#5
I can see the tv but it doesn't sound
hi first of all u should check ur transistor connections.Check your Horizontal and vertical output transistors.You should also check the horizontal and vertical yoke connections as well as your low voltage regulators.... if any of these got damaged u should purchase a new one.. but try to purchase with the help of a tv service assistant...
thank u!!!
rate me
Broken karaoke mic ed8000 model
Hi im joe,
if the screen says no font, no picture, no song data it means all the data installed was lost. you have to send it to the nearest service center to have it reprogram.
Not finding what you are looking for?
