Magic Audio Players & Recorders - Page 3 - Answered Questions & Fixed Issues
I dropped the mic and
Either one of two things has happened. First, you may have unseated a wire from its solder, or the entire diapragm is damaged. I would open it up and have a look-see for any damage to the wire... If there isn't, I would send it in for service.
5/1/2011 5:54:41 AM •
Magic Star...
•
Answered
on May 01, 2011
•
203 views
My ed 8000 mic cable
Hi, I think a local musical instrument store may provide the most inexpensive. Someplace such as Guitar World or someplace similar. I would think you shouldn't have to pay more than fifty dollars to get it fixed. Good luck, I hope I was helpful-please comment back as I need some votes to boost rank and THANK YOU for choosing FixYa, Prodzilla
Wireless mikes won,t connect to
press the connect buttons both @ the same time,& hold them until they both stop flashing.
or check battery in mic.
3/1/2011 7:50:06 PM •
Magic Star...
•
Answered
on Mar 01, 2011
•
248 views
2-second delay with Magic Sing
i bought et18k. just the same as yours.its 2 days old and has the same problem. the technical assistant says that its because of the digital setting that new tvs have. there are two ways to solve this though:
1. connect the video (yellow plug) to the tv. and the other two plugs (yellow and white) to the stereo. when i say stereo, its not the dvd home theater system that you have but a separate one. if you connect it to the home theater that you have, it'll just sound the same, you still have the delay.
2. connect the magic sing to the older tvs hangin out. and you'll get no problem at all.
**TVs such as sony, samsung, philips, sharp and all plasma tvs including other newly designed tvs will have the delay since they all share the HDMI thingy that causes sh*t.
My microphone don't turn on
I believe your adapter is not working anymore, that is what happened to mine. I have the ED8000 model, but I found out that if you inserted 2 AA batteries works, the only thing it only last for 3 hours of singing then you have to change it again. That is the reason I'm looking online if I can only buy the adapter not the whole magicsing.
I have a horizontal hold problem when I turn the
You seem to have a fault in your TV for a horizontal failure to synchronize with the horizontal pulses.
SInce the model was not mentioned I suppose this must be an older version. It is possible that the sync IC is not working as it fails to lock the vertical and horizontal pulses to stabilize the circuit.
If the entire sections are on one IC then it might be fault.
Now since as you mentioned that the set works fine initially , you might notice that the IC is heating up too soon and hence resulting in the horizontal shift. If so try to use a- freeze it-Spray on the IC and if this brings back the horizontal. then try to see for any faulty capacitors on the IC section, check the power to the IC.
If not the IC must be replaced.
Have a wonderful New Year.
Microphone makes a static sound
Make sure your connections are clean and tight. There may also be an intermittant or broken wire in the cord. See if you can narrow the problem down by holding some parts of the wire stationary and moving other areas. gently shake the mike with the set off and listen closely for loose parts making noise. (The idea is to eliminate the areas that are good and what's left is broken.)
Hope this helps
12/29/2010 2:54:21 AM •
Magic Star...
•
Answered
on Dec 29, 2010
•
637 views
I hear a "pop" from
very common problem caused by pressure waves, try singing off mic but on axis so maybe a 6inches away.
or buy a pop shield (transparent audio foam to cover the mic capsule)
should sort it out, if this does not work then the mic may be damaged.
hope this helps
thanks for using FixYa
Battery terminals corroded
Go to Radioshack and buy DEOXIT.. its made to clean oxidation (corrosion) and is electronic safe. If the corrosion (oxidation) didnt leak into the circuit board this will allow you to get proper contact again
Not finding what you are looking for?
