Magic Audio Players & Recorders - Page 6 - Recent Questions, Troubleshooting & Support

hello saleem in order to help you load up some pictures best regards antonio

check your cable withe a multimeter for a break . set multimeter to continuity. if that does not slve it check the conector on mic by stripping the mic down.

I don't know much about this device, but I do know that this company has a good service department. Send them an email at [email protected] and they should be able to help you out.

you have to buy a konzert amplifier coz if you don't thats the result. konzert amplifier will cost you not more 5k. . .

Find a medium quality dynamic microphone and swap the element. You will need soldering skills to do this or you will damage the element. Most should fit.

i bought et18k. just the same as yours.its 2 days old and has the same problem. the technical assistant says that its because of the digital setting that new tvs have. there are two ways to solve this though:

1. connect the video (yellow plug) to the tv. and the other two plugs (yellow and white) to the stereo. when i say stereo, its not the dvd home theater system that you have but a separate one. if you connect it to the home theater that you have, it'll just sound the same, you still have the delay.

2. connect the magic sing to the older tvs hangin out. and you'll get no problem at all.

**TVs such as sony, samsung, philips, sharp and all plasma tvs including other newly designed tvs will have the delay since they all share the HDMI thingy that causes sh*t.