Mag Innovision XJ - Recent Questions, Troubleshooting & Support - Page 4

Solution 1 It might have defaulted your sound button to mute Got to control panel Sound and see if sound has been muted Solution 2 unplug jack out of plug at rear of computer test it in other jack holes what might have happened is that the default setting for speaker and mic might have swapped round best way is play some music and move jack plug around see if you get any sound Solution 3 Sometimes the sound software needs re setting bring it up and re sett speekers and mike setting by the colours you have you jack in remember front and rear you will be mainly dealing with rear jack interface green pink blue white etc hope this helps

Considering your file is a media file you should go for digital media recovery software. I can suggest you few, must try Stellar Phoenix (http://www.stellarinfo.com/mac-photo-recovery.htm), Disk Drill (http://www.cleverfiles.com) and Wondershare (http://www.wondershare.com/data-recovery/)

Chek Ur OS and download drivers from here :
http://list.driverguide.com/list/company621/

Windows 8 when configured usually uses a microsoft account. When it asks for your password, what does it say your login name is? If there is a login account such as [email protected] then you use a microsoft login account. If it simply says "Robleh" then you will be using a local account. Here are some suggestions on how to reset your password in windows 8 for each situation: http://pcsupport.about.com/od/windows-8/f/forgot-password-windows-8.htm I hope thiis helps! -Rogue

That usually means that the connection between the PC and the monitor has been interupted- check that the cable (probably has blue ends) between the two is firmly connected, and power it back up. If that doesn't work, you have one of three problems; a broken VGA cable, a broken monitor, or a broken video card. Finding out which- you'll actually need someone tech-savvy there to help you figure that out. Try plugging the monitor into a different computer. If that fails, use a different VGA cable (cables are pretty cheap at monoprice.com), and if that fails, it's your video card.

whatever the manufacture says it is

">Your Computers hardware is Mag 996pf. You like Windows7 to be the software. An installer is what you like.

You have to press the fn+f5 I think in your laptop. It is the same when you are using a projector.

Hello,

Can you send pictures of the power board to me at [email protected] I will check our service manuals for the model and get back with you about a solution.

Buddy
Corporate Computer

possible failure of the backlight inverter