Mag Innovision LT - Recent Questions, Troubleshooting & Support - Page 4

0helpful
1answer

Need a new power cord

Hello,If you need the whole adapter, you can get them here:http://www.ccl-la.com/catalog/product_info.php?products_id=48If you need just the power cord for the adapter they are available herehttp://www.ccl-la.com/catalog/product_info.php?products_id=50I hope this helps.
3/23/2012 7:05:20 PM • Mag Innovision... • Answered on Mar 23, 2012
0helpful
1answer

How to I get the speakers inside monitor to work?

I recently was given a MAG Model 780 too. I found the input for speakers just today. When looking at the monitor, on the left side behind the monitor you should be able to feel a flat horizontal surface. If you lay monitor down, you will see 2 mini-plug openings. These are your input spots for speakers/microphone. I believe pink is speakers & green is microphone.
2/14/2012 5:39:13 PM • Mag Innovision... • Answered on Feb 14, 2012
0helpful
1answer

Need cord for LT765

The power adapters are available here:http://www.ccl-la.com/catalog/product_info.php?products_id=48
1/8/2012 2:26:25 AM • Mag Innovision... • Answered on Jan 08, 2012
0answers
0helpful
1answer

I need to know wich kind of power cord the monitor

It would ideal if you can get the original from the maker.please check this link:http://maginnovision.com/Products/Product_Cat.aspx?ii=1457
10/17/2011 6:48:38 AM • Mag Innovision... • Answered on Oct 17, 2011
0helpful
3answers

Cleaning monitor

I dont know which type you have but here is how to clean either:

CRTs
Those big chunky CRT monitors have glass screen which are easily cleaned. The important thing to remember is that you don’t ever want to spray any liquid directly on the screen. Instead, spray the cloth with water or a mild window cleaning solution then wipe the screen. You can use the same damp cloth to clean the entire monitor case, as well. If you prefer, you can also use moistened paper towels to clean CRT monitors, You will be only cleaning the outside of the monitor case and screen. Never open the monitor casing which contain electric voltage that can cause a shock.

Flat Panel LCDs
LCD monitors are often called flat panel monitors because they are flat and thin. These are the types of screens that are used in most laptop computers, and they are also becoming very popular for desktop computers. LCD screens are softer than CRT glass screens, so they require some extra tender loving care. Keep your fingers and sharp objects away from these screens since they are susceptible to damage and scratches.
Use a soft dry cotton cloth to remove fingerprints and smudges from the screen. If this does not completely remove the dirt and splotches, use a small amount of isopropyl alcohol on the cleaning cloth that has been dampened with water. (A small amount of vinegar can be substituted for the isopropyl alcohol.) Again, spray the liquid on the cloth and never directly onto the screen. Do not use paper towels on an LCD screen as they can scratch the screen. Never use ammonia, ammonia-based cleaners, or strong cleaners which can cause the surface to yellow and become brittle.
It is good to have a special clean cloth that is dedicated to use on the LCD screen. Don’t pick up any old rag, as dirt particles in the rag can scratch the surface of the screen. Special LCD cleaning cloths are available and can be an excellent investment.
10/6/2011 2:18:26 PM • Mag Innovision... • Answered on Oct 06, 2011
0helpful
1answer

My monitor MAG lcd 16inch

In case you haven't done it already, please connect the monitor to the computer and turn everything on and let it boot up. While the screen is black, take a flashlight and carefully hold it against the screen. If you can see that the LCD portion of the screen is working, then continue reading. This model seems to have a number of complaints against it. That being said, many people seem to believe that caps become swollen just because that's what they do. In my experience, for multiple caps to swell or need replacing, it takes a long duration over-current event or a short duration death event. The most common long duration over-current event in a monitor is burned bulbs and/or burned transformer. The most common short duration death event being a power surge (blackouts, lightning, or connected to the same breaker as an air conditioner or microwave) If you have successfully replaced the caps, then you already show some technical prowess. Search your main board model number for some more info. If you can read the tiny part numbers on the transformer, search for a datasheet to find a way to test it with a meter. Bulbs are a bit harder to do. I've done it, but it is almost impossible to keep even a single speck of dust from entering the insides. If you get to the bulbs, and they are blackened on the ends, you can be fairly certain that they are burned and creating an over-amp condition in the driver circuits. Best of luck to you.
9/19/2011 7:57:08 AM • Mag Innovision... • Answered on Sep 19, 2011
0helpful
1answer

POWER SUPPLY

check your cables especially to the power supply or check your outlet if it is giving the complete consumption of power to the monitor.
9/16/2011 2:32:39 PM • Mag Innovision... • Answered on Sep 16, 2011
0answers
0helpful
1answer

No sound from speakers -

Hello,You need to connect the output from your sound card to the 'line in' connector on the monitor.Regards,nicam49
8/3/2011 10:14:49 PM • Mag Innovision... • Answered on Aug 03, 2011
0helpful
1answer

I just bought a used

windows problem, not monitor
dbl-click on clock and change it
7/28/2011 7:10:49 PM • Mag Innovision... • Answered on Jul 28, 2011
0helpful
1answer

Where does the adapter plug in on the lt-456s

back of VGA plug
7/28/2011 7:08:44 PM • Mag Innovision... • Answered on Jul 28, 2011
0helpful
1answer

I am unable to get MAG Innovision 14" LCD monitor

You need laptop-type 12V, 2.5A (minimum) adapter plugged into back of VGA plug
7/28/2011 7:08:23 PM • Mag Innovision... • Answered on Jul 28, 2011
0helpful
1answer

I am trying to hook up a new computer to my

need laptop-type 12V, 2.5A (minimum) adapter plugged into back of VGA plug
7/28/2011 7:07:17 PM • Mag Innovision... • Answered on Jul 28, 2011
0helpful
1answer

Does lt-456s have volume

nope, no speakers
7/28/2011 7:05:43 PM • Mag Innovision... • Answered on Jul 28, 2011
0helpful
3answers

Mag lt456s power supply bad

The correct one would be 12v @ 2.5 to 3 Amp.
If the set used less current than 1 amp it would be in milliamp (500ma which is half an Amp)etc.

As long as you get one that is 12v @ 2.5 to 3 amp it will be fine.
You could buy one with a higher current rating like 4,5,6 or more Amp's as long as it's 12v DC. The set will only use the current that it needs to function so I higher current won't hurt. It's the voltage you have to make sure is correct. If you do buy one with a higher current rating it will probably last longer because it wont get so hot.
7/28/2011 7:02:38 PM • Mag Innovision... • Answered on Jul 28, 2011
0helpful
2answers

I need a driver i

first check the power cable connection at both end i.e. source of power and also at monitor side if loosen one tight it or may try to change the cable
7/28/2011 6:54:17 PM • Mag Innovision... • Answered on Jul 28, 2011
Not finding what you are looking for?

1,129 questions posted

Ask a Question

Usually answered in minutes!

Top Mag Innovision Computers & Internet Experts

Cindy Wells

Level 3 Expert

6688 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66835 Answers

Are you a Mag Innovision Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Mag Innovision Computers & Internet

  • Forum

View Most Popular

  • Mag Innovision Computers & Internet
Loading...