Mag Innovision LT - Recent Questions, Troubleshooting & Support - Page 3

0helpful
2answers

My mag Innovision flat lcd monitor is blank after 3 seconds..

It is not easy. I slip a knife in the bottom edge and slowly work my way around the bottom opening it a little by little. Once you get the bottom and part of each side you can push the plastic towards the top and it will pop off. There are plastic clips holding the bezel down. I always break a couple on opening, but at least the monitor gets fixed. This is not made to open, so good luck.
8/31/2013 4:02:06 PM • Mag Innovision... • Answered on Aug 31, 2013
0helpful
1answer

No sound from MAG 780

Dumb question, but do you have the audio cable hooked up from the monitor to an audio output on your computer, volume up, mute turned off.
1/27/2013 1:45:36 AM • Mag Innovision... • Answered on Jan 27, 2013
0helpful
1answer

Cant figure out where the power cord goes or even if it has one...

Hello,There are several Mag monitors that use external AC adapters that plug into the VGA cable. Look on the blue connector and you should see the hole where the adapter plugs. The adapter is 12v 5 amp such as this one.http://www.ccl-la.com/catalog/product_info.php?products_id=48
12/3/2012 5:27:00 PM • Mag Innovision... • Answered on Dec 03, 2012
0answers
0helpful
2answers

A Simple Power Adaptor Issue

see are u sure that cable is for that slot...
try to open it as slider or use some lever to open it
10/14/2012 3:17:07 PM • Mag Innovision... • Answered on Oct 14, 2012
0helpful
1answer

The monitor displays the message mode not suported

Certainly due to a to high resolution...Regards,Louis
9/18/2012 7:01:35 PM • Mag Innovision... • Answered on Sep 18, 2012
0helpful
1answer

I have a brighten symbol that keeps popping and I can't get it to go away right in the middle of screen

go to set up menu then select the brightness adjustment and then exit.if can get with adjustment turn off then unplugged don't use for an hour to reset the power supply.
8/13/2012 12:11:43 PM • Mag Innovision... • Answered on Aug 13, 2012
0helpful
1answer

Speakers don't work

check your software,
8/6/2012 7:37:18 PM • Mag Innovision... • Answered on Aug 06, 2012
Not finding what you are looking for?

1,129 questions posted

Ask a Question

Usually answered in minutes!

Top Mag Innovision Computers & Internet Experts

Ekse

Level 3 Expert

13435 Answers

Mandeep  Singh
Mandeep Singh

Level 3 Expert

1184 Answers

Cindy Wells

Level 3 Expert

6369 Answers

Are you a Mag Innovision Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Mag Innovision Computers & Internet

  • Forum

View Most Popular

  • Mag Innovision Computers & Internet
Loading...