Mad Catz Video Game Consoles & Games - Page 8 - Recent Questions, Troubleshooting & Support

you have to put headset into pairing mode ...usually by holding power button for a few secs until it flashes blue/red then have the PS3 search and it should find it ..the default password should be 0000 ...check manufact website for full instructions on how to pair if this doesnt help...i would tell you more but would need headset model number

I would try sticking it into a gamecube and formatting it in there then try using it again in the wii, make sure its in the slot thats on the same side of the system as the disc drive. If it still doesn't work the memory card may be corrupted or the battery is dead-some have one some don't.
Good luck and happy gaming!
William

Contact MadCatz: http://www.madcatz.com/Default.asp?Page=212

Ask to see if they can send you the disc.

Try this video

On the top of the Wii console there is a little flap that opens upwards. You will then be able to see 4 ports that look like a "D" shape, the classic controller plugs into one of those.Hope this helps.

MadCatz Racing Wheel does not support devices with a USB plugged into a port specificly. This is of course if you're indeed using it. Also, some games will not support the MadCatz racing wheel directly. Many games are not designed to work with it. So check online for documentation on it.

Try getting a can of compressed air and clearing out the dust in the multitap and the port you're plugging the multitap into :)

sir good day there are two way on how to configure your wireless controller to your ps3 console.... the automatic pairing and a manual pairingfirst way an automatic pairing1.turn on your ps3..2.Connect the smaller end of the included USB cable to the PS3 controller.3.Connect the opposite end into either USB port on the front of the PS3. The pair light on the PS3 will flash. When it stabilizes, you can disconnect the USB cable and use the controller wirelessly.second way a manual pairing1.. turn your ps3..2.Connect the smaller end of the included USB cable to the PS3 controller.3.Connect the opposite end into either USB port on the front of the PS3. Press the "PS" button on the center of the PS3 controller. The pair light on the controller will flash. When it stabilizes, you can disconnect the USB cable and use the controller wirelessly.you can try that 2 way on how to configure your controller to your ps3 console if this help you please rate me thank you sir..

connection is broken, this product must be returned, sorry hope this helps good luck :D