Mach Speed Tablets & eReaders - Recent Questions, Troubleshooting & Support
How to reset a trio stealth g2
If you can power it on go into settings then backup and reset. This will reset tablet to the out of the box status. You will loose all of your data. If it will not power up, press power and volume up while booting till the screen comes on.Boot options will come up then reset. Be sure the tablet is fully charged.
How do I do a factory reset?
Hi There.
Under Settings, there should be a scetion called "Backup and Reset" - The Factory Reset option will be in there.
Hope this helps!
How do I connect to bluetooth
Go to setting turn on Wifi and search in a few minutes it should show available networks connect to your network and if protected enter password from router or modem. Will will tell you if it is connected or trying.
I cannot get the tablet to charge. I am trying using the USB port, as I cannot be sure the a/c adapter I have is correct. Thanks
If your not getting any indication lights on tablet could be wrong USB adapter transformer. It could also be a bad wire from adapter.
You did not indicate type of tablet or adapter you are using. Worst case you have a bad battery in table and would most likely ha e to be sent in for repair. However if you have a cell phone USB charger for a car try plunging in tablet in and see if it charges. If it does get a new adapter with higher amp than the one your using. But beware the batteries can only be charged to a max amp see web site for you tablet for recomindation.
Not finding what you are looking for?