Lucent Computers & Internet - Recent Questions, Troubleshooting & Support


click on start and click on run
on run open box type in cmd and hit enter
black window will open, type in ipconfig then click on enter then look for the default gateway address, that;s the ip of your router

dont 4get to rate solution

Lucent DSLPipe... | Answered on Sep 05, 2018


You have been prompted for the login password and received the following message: “Login Password isinvalid”.• Re-enter the correct password and press enter. Remember that the password is case-sensitive. Check that youare entering admin in lowercase and that the Caps key is not active.• If you have forgotten the password, you must reset the login password. Refer to the User Guide, ChangingConfiguration Switches, and perform the following procedure:1. Move switches 5 and 6 down.2. Type login <newpasswd>. Password checking is overridden.3. Move switches 5 and 6 up.4. Complete any configuration update that caused the prompt for login.5. Change your login password to a new password.6. Store the configuration and reboot the router.Note: If you have not reset switches 5 and 6 to the up position and have rebooted, this will place the router inmaintenance mode. Set switches 5 and 6 up and turn the power off and
www.alliedtelesyneurope.com/media/.../manuals/rg624-34_um_a.pdf

Lucent DSL... | Answered on Sep 25, 2014

Not finding what you are looking for?
Lucent Logo

106 questions posted

Ask a Question

Usually answered in minutes!

Top Lucent Computers & Internet Experts

ray gallant

Level 3 Expert

70853 Answers

JonSnell Electronic
JonSnell Electronic

Level 3 Expert

32571 Answers

Tom Chichester

Level 3 Expert

60347 Answers

Are you a Lucent Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...