Logitech Televison & Video - Page 2 - Recent Questions, Troubleshooting & Support

Hold Power and press Channel Up or Down. There are 150 manufacturers, so if you don't get functionality within 150 presses in one direction, you're SOL.

https://www.logitech.com/assets/44640/3/harmony900-user-guide.pdf https://www.logitech.com/assets/44640/3/harmony900-user-guide.pdf

1. Remove the batteries. While holding the 2 button down, connect the USB cable. The remote will boot into normal mode. Did this fix the problem? If no, please continue to troubleshoot.
ANSWER:
2. Update the firmware. Update the configuration. Did this fix the problem? If no, please continue to troubleshoot.
ANSWER:
3. There could be a stuck button on the remote causing the symptom. Remove the batteries from the remote. Push in, and massage each button ensuring it is not stuck down. Replace the batteries and Update the firmware. Update the configuration. Did this fix the problem? If no, please continue to troubleshoot.
ANSWER:
4. Remove the batteries from the remote. Manually place the remote into `Safe Mode` by holding off and plug in the USB. Upgrade the firmware in the remote. Update the configuration. Did this fix the problem? If no, please e-mail us back for further information about your issue.
ANSWER:

FIRMWARE:
1. Log into the Logitech Harmony Remote Software on your computer
2. Click on the Downloads button at the top-right corner of your screen
3. Click on the Firmware button. Follow the onscreen instructions to upgrade the firmware on your Harmony remote
4. Once the firmware upgrade is complete, click on the Update Remote button
5. Test your remote.

they are non repairable. you try turning of computer revel keyboard wireless adapter restart machine install wireless adapter and the key board. if there is no change toss and buy another one.

1. Please remove the batteries from your remote
2. Press and hold down the 2 button while connecting the remote to your computer
3. The Harmony Remote LCD screen should display Upgrade Success
4. Please un-plug the remote from your computer and test

Also check for any stuck buttons on the remote. Lastly, try updating your programming through the Harmony software including any firmware updates.
Please rate if this was helpful!
DigitalPlus!

Same here, button stuck. Many thanks to all

SEE THIS: logitech 650 universal remote spectrum cable Google Search Also see this SPECTRUM Tech Support (and ask them!) https://www.timewarnercable.com/en/support/overview.html AND THIS How-to and Product VideosLink may help too (sorry about the CAPS)! How to and Product Videos and THIS: Cable Box Equipment Manuals: https://www.timewarnercable.com/en/support/equipment-manuals.html Anthony

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. https://homenol.blogspot.com/ https://remotesearch.blogspot.com/ https://electronicshelponline.blogspot.com/ https://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device./

i would suggest these items below hope they will help otherwise order another one from amazon or elsewhere Logitech Harmony 650 Troubleshooting Universal remote released in 2009. Easily identifiable by the Color Smart Display. Buttons Not Responding When you press a button, nothing happens.

Dirt in the Key

If there appears to be dirt or another object blocking the button, remove the button and clean the area using a Q-tip and some rubbing alcohol.

Physical Switch is Broken

If the problem persists after cleaning, the button switch may be broken and needs replacement. Check out the replacement guide for how to do this. Battery Drains Quickly Even while not in use, the battery runs down abnormally fast.

Faulty Battery

If your batteries are leaking, remove the batteries and clean the socket before inserting new ones. If that is not the case the batteries may have also been drained and are in need of replacement.

Screen not Dimming Properly

Check to make sure that there are no buttons that are stuck by removing the batteries and massaging the buttons. If that does not work then try switching it in and out of safe mode a few times. If the problem persists then you will need to replace the screen. Refer to the replacement guide for instruction on how to do this. Device Resetting The remote resets all connections with other devices seemingly at random.

Faulty Battery Connections

Check to make sure that your batteries are well seated in the connectors. If they are, check to make sure they are not dead by replacing them. If the remote still does not work, try testing the battery connectors to see if they are loose. If they are, consider replacing/repairing them. Cracked/Broken Case Often when dropped, the case may break in various places.

Broken Case

Test the face plate of the remote by gently pushing on it. If you see a a crack or a break then it might be time to replace it, this is merely a cosmetic issue, but can become a problem when buttons can become dislodged. Unresponsive Remote The remote simply won't function or respond to commands.

Faulty Motherboard

Test the remote by viewing the infrared LED with a digital camera or a cell phone camera. Press any button on the remote and watch the screen to see if the LED lights up, and if it does not check to make sure that your batteries are not dead. If the remote is still not functioning properly or at all that could mean that the circuits have shorted out on the motherboard and it may need to be replaced. Use the Motherboard Replacement Guide to help you with this.

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. https://homenol.blogspot.com/ https://remotesearch.blogspot.com/ https://electronicshelponline.blogspot.com/ https://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device. Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts. /

https://www.logitech.com/assets/44645/13/harmonyone-user-guide.pdf You must press the DEVICE button to select among the just what the remote may control. Once you select which one, the other controls on the remote (such as PLAY) work. Page 11 of the guide above mentions this device button. Note that when you are finished using the DVD, you may have to select DEVICE again to select the TV so the buttons will then control the TV. Old remotes require you to enter codes to operate extra devices and indeed the TV but I think your remote may not require such.

Utube will help

Look for a little tiny hole that resets it, usually a paper clip does it.

Press and hold the Menu button (located above the Channel Up button) and the Off button together for 20 seconds. The remote screen will turn off, then turn on again displaying the image of a remote and a circular arrow. After a few seconds your remote will be restored to factory defaults and you may sync again.