Logitech Televison & Video - Recent Questions, Troubleshooting & Support


Press on it with both thumbs in the depressed area and push down and toward the end.  There is a small latch behind the depressed area.  By pushing down as well as toward the end of the unit you should be able to get the latch to release and the cover will slide toward the end.

Logitech Harmony... | Answered 2 days ago


How to reset Harmony Hub remote?
Press and hold the Menu button (located above the Channel Up button) and the Off button together for 20 seconds. The remote screen will turn off, then turn on again displaying the image of a remote and a circular arrow. After a few seconds your remote will be restored to factory defaults and you may sync again.

Harmony Factory Reset - Harmony Support

support.myharmony.com > en-us > how-to-factory-reset-your-harmony
Search for: How to reset Harmony Hub remote?

Logitech... | Answered on Jul 11, 2020


You can buy it from Amazon

Logitech... | Answered on Jul 07, 2020


Maybe your using relatively cheap batteries with a low capacity.

I would try GP powerbank batteries or simular with charger with a high capacity like GP 2300. If it still drain quickly there is something wrong with your remote.

Logitech Harmony... | Answered on May 31, 2020


I think what is happening with your tv is it does not see the signal. If there is no signal going to the tv it will not let you select the source you like, in this instant HDMI 1. What you probably need to go do is look at you dishtv set top box and go to that box's menu and enable hdmi output. Hope this helps.

Logitech Harmony... | Answered on Apr 14, 2020


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://homenol.blogspot.com/
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.

This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.
{View the site in web view by Mobile or a desktop to see the search box. Mobile view has no search box.}...

Logitech... | Answered on Jul 05, 2019


Hold Power and press Channel Up or Down. There are 150 manufacturers, so if you don't get functionality within 150 presses in one direction, you're SOL.

Logitech Harmony... | Answered on Jan 24, 2019


No remote code for universal exists, you must use the logitech remote

Logitech... | Answered on Jan 17, 2019


Google (Logitech)(900)(manual) without parens.

Logitech... | Answered on Oct 11, 2018


1. Remove the batteries. While holding the 2 button down, connect the USB cable. The remote will boot into normal mode. Did this fix the problem? If no, please continue to troubleshoot.
ANSWER:
2. Update the firmware. Update the configuration. Did this fix the problem? If no, please continue to troubleshoot.
ANSWER:
3. There could be a stuck button on the remote causing the symptom. Remove the batteries from the remote. Push in, and massage each button ensuring it is not stuck down. Replace the batteries and Update the firmware. Update the configuration. Did this fix the problem? If no, please continue to troubleshoot.
ANSWER:
4. Remove the batteries from the remote. Manually place the remote into `Safe Mode` by holding off and plug in the USB. Upgrade the firmware in the remote. Update the configuration. Did this fix the problem? If no, please e-mail us back for further information about your issue.
ANSWER:

FIRMWARE:
1. Log into the Logitech Harmony Remote Software on your computer
2. Click on the Downloads button at the top-right corner of your screen
3. Click on the Firmware button. Follow the onscreen instructions to upgrade the firmware on your Harmony remote
4. Once the firmware upgrade is complete, click on the Update Remote button
5. Test your remote.

Logitech Harmony... | Answered on Aug 31, 2018


they are non repairable. you try turning of computer revel keyboard wireless adapter restart machine install wireless adapter and the key board. if there is no change toss and buy another one.

Logitech... | Answered on Aug 19, 2018

Not finding what you are looking for?
Logitech Logo

1,675 questions posted

Ask a Question

Usually answered in minutes!

Top Logitech Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76407 Answers

ray gallant

Level 3 Expert

68648 Answers

scotteclipse

Level 1 Expert

15 Answers

Are you a Logitech Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...