Logitech Recent Questions, Troubleshooting Help & Support

It sounds like you have done some initial troubleshooting and ruled out some common issues with the power supply. If the fuses in the plug and the sub unit are both okay, and the wire from the plug to the outlet socket is also okay, the issue may be with the internal components of the Z5400. It could be a problem with the power supply or the mainboard of the unit. It could also be a problem with a component that is connected to the mainboard, such as the control panel or the display. If the unit is old, it may be that the internal components have simply worn out and need to be replaced. In that case, it may be more cost-effective to replace the unit rather than trying to repair it.

I'm sorry to hear that your Logitech 610 remote is stuck in safe mode. Here are a few steps you can try to try to resolve the issue: 1. Make sure you are using new, high-quality batteries. 2. Try resetting the remote by removing the batteries, pressing all of the buttons, and then reinserting the batteries. 3. If the issue persists, try connecting the remote to the Logitech Harmony software on your computer using the supplied USB cable. This will allow you to access more advanced troubleshooting options. I hope this helps! Let me know if you have any other questions or if there is anything else I can do to assist you.

Hi,
You should change the fuse, if still does not work, then you should contact Logitech Customer Care for replacement if under warranty.
Thanks and have a nice day
J-

It sounds like you are trying to use the same formatting settings on your new Logitech keyboard that you had on your old Logitech keyboard, but the formatting button is not present on the new keyboard. To add the formatting button to your new Logitech keyboard, you will need to do the following:

1. Open the Logitech Options software. This software allows you to customize the settings and functionality of your Logitech keyboard.
2. Select the "Buttons" tab. This will allow you to customize the buttons on your keyboard.
3. Find the formatting button that you want to add. Depending on the model of your keyboard, you may have the option to add a variety of formatting buttons, such as bold, italic, and underline.
4. Assign a function to the button. To add the formatting button to your keyboard, you will need to assign a function to it. Click on the button and then select the formatting function that you want to use.
5. Save the changes. Once you have added the formatting button and assigned a function to it, click the "Apply" button to save the changes.

I hope this helps! Let me know if you have any other questions.

Unfortunately, Logitech does not offer any Bluetooth support for the Logitech Y-RAJ56A keyboard. The keyboard is designed to be used with a wired connection, and it does not have any Bluetooth capabilities. Yes, you can use a Bluetooth adapter to connect your Logitech Y-RAJ56A keyboard to a Bluetooth enabled device. However, you should bear in mind that the keyboard will not have any additional features or support when connected via Bluetooth. So you will need to purchase a Bluetooth adapter. The Kinivo BTD-400 Bluetooth 4.0 USB Adapter is a good choice and is compatible with most versions of Windows and Mac. P.S. BTD400 Advisory A recent update to Windows is preventing the BTD-400 from locating drivers automatically when plugged in for the first time. Please visit the article below to set up the BTD-400 Bluetooth Adapter for the first time. BTD400 Driver Installation

go to 'Control Panel', 'Sound', 'Recording', and select your Logitech as the default device.

Send it back to Logitech for repair under warranty. https://www.logitech.com/assets/49301/3/ultrathin-keyboard-cover-i5-quick-start-guide.pdf ..

Disconnect cam, restart computer, plug back in.

Hi There,

I had exactly the same problem as this, and was able to solve it by turning off "secure mode" on the keyboard (which stopped it encrypting all the keystrokes) by taking the following steps:

1) Press Ctrl + Alt +F12
2) Press connect button on the receiver
3) Press connect button on the keyboard
4) Press escape key
See this post on the logitech forums for details:
http://forums.logitech.com/logitech/board/message?board.id=general&thread.id=13126

Hope this works as well for you as it did for me!
Mark :)

To change the font size within your browser press

<CTRL> + to make the font size bigger
<CTRL> - to make the font size smaller

If this works please click the THUMBS UP below, thanks.

Reboot the computer. If that doesn't work. Turn the computer off. Remove the dongle. Turn on the computer. Insert the dongle. Wait until the computer finds and install it.

s120-quick-start-guide.pdf - Logitech

https://www.logitech.com > assets > s120-quick-st... PDF S120 STEREO SPEAKERS. HAUT-PARLEURS ST?R?O S120. Complete Setup Guide ... www.logitech.com/support/S120. ADJUST THE VOLUME ... this manual.

• S120 Slim Lightweight Stereo Speakers - Logitech

  https://www.logitech.com > en-ca > products > s120-sli... This slim speaker design offers easy setup via any 3.5 mm input and access to all controls on the right speaker. 4.4 Watts Peak/2.2 Watts RMS power produces ... INTERNAL wiring https://www.google.com/search?q=Logitech+S120+transformer+wiring ....

I need help find the driver for a webcam, i dont know the brandname, it olny detects that it a CIF single chip device

https://www.elektroda.com/rtvforum/topic3093184.html and it looks like they were the only ones to take a crack at it. https://www.google.com/search?q=logitech+z323+connector+pinout Have you tried Logitech Support direct? ..

it you forget something that must install on your PC to operate your Mouse G502. Just get logitech g502 software first, then install it to your PC

All the information is here https://support.logi.com/hc/en-us/articles/360024847013--Downloads-X52-Space-Flight-H-O-T-A-S- Manual https://www.logitech.com/assets/65328/2/x52-hotas.pdf ..

This may help; https://www.youtube.com/watch?v=Tj4CXixMYIQ

Most likely it's a programming thing but it could be you have a loose wire... Never no.. Mite try getting a cheap pair try to see if the same problem occurs.. Thanks good luck

The aug 4 2012 answer is the best and a easy great fix for all keyboards without the NumLock button. Simply open windows on screen keyboard by =Windows button+shift+O or icon on task bar for keyboard or Windows search for keyboard on screen. Then click options and click NumLock or number lock on in settings. Also pause break button on Logitech also will enter NumLock on or off. Then your all set to use keyboard as a mouse pointer.

did u find a place to buy only the reciever? i've lost my reciever too..