Lionel Toys - Page 7 - Recent Questions, Troubleshooting & Support
I need a new motor
Did you get an answer to your question about the Ferris wheel?
11/17/2022 12:53:04 AM •
Toys
•
Answered
on Nov 17, 2022
5 foot dancing santa gears missing in neck
Check his clothes and boots for the missing gears. If they aren't there, you either get a new one or find a local model maker to help. They are all made in China at lowest price point for retail, purchase for $5, sell for $99.95..
11/13/2022 7:24:53 PM •
Toys
•
Answered
on Nov 13, 2022
Daisy BB gun Model 1894 won't ****
If you need a repair manual contact me. I purchased one a year or so ago to make repairs on a couple I had and have since scanned it in to my computer so it can be emailed out. It's a big file. If you're interested let me know.
11/11/2022 2:05:43 AM •
Toys
•
Answered
on Nov 11, 2022
Need code for 2004 chevy optra am fm cd player...
try one of these :
1165 1325 1341 1630 2145 2152 2346 2453 3116 3241 3451
3462 4156 4236 4265 4316 4353 4362 4513 4524 4553 4653
5224 5226 5241 5253 5256 5436 5624 5813 6253 6361 6461"
11/7/2022 3:47:43 PM •
Toys
•
Answered
on Nov 07, 2022
My gemmy brand light show christmas tree not working........
When you press the reset button on the controller box, then you need to press the small recessed button on the back of the remote control. You'll need a pen to get in there, or better yet a paper clip. That will reset the remote.
11/3/2022 9:23:43 PM •
Toys
•
Answered
on Nov 03, 2022
I was wondering why Leap Pad Explorer has an white dot when I power off?
on a tablet it is normally screen damage. Or this
If the LeapPad does not complete the shutdown process and the white dot remains on the screen for more than ten seconds, complete the shut down by pressing and holding the power button on the LeapPad for ten seconds
. This will fully power the LeapPad down, and it will start up normally next time you power it on.
..
10/24/2022 11:01:46 PM •
Toys
•
Answered
on Oct 24, 2022
Toy ATM Bank . Need
There are several toy ATMs on the market, none of them identifiable by manufacturer online. :(
BUT, you MAY have an option, as some toy ATMs allow for you to access them if you lose the card by using ANY credit card, and then your toy's PIN.
Sadly, these are not meant as anything more than a toy, so replacement parts are not available. They are a non-renewable item, and if they break, or lose parts, they become refuse. Such is the life of mass produced toys from china.
I hope the credit card thing works for you. Otherwise, you will have to break the toy to extract your funds.
~M
10/11/2022 1:21:08 PM •
Toys
•
Answered
on Oct 11, 2022
Hey I recently bough a Propel RC Sky Force
take it to a different large chain store like the W world... and exchange it for a different one. Of course the store has to sell it there before you can exchange it. worst comes to worst, I always have good luck calling the company and complaining. I have gotten free vouchers for new items that way.
10/4/2022 2:11:07 PM •
Toys
•
Answered
on Oct 04, 2022
Can I fix an error on my orthofix 2212 it shows
Why are you guys giving answers to fix a printer when the OP is asking how to clear the error code on an orthofix bone growth stimulator used to help the bones fuse together after back surgery... I'll give my best guess as I am having the same issue. They are set to last a certain amount of time and designed to stop working after that set time. In my case I got the device, postponed my surgery and my orthofix wouldn't work after I actually had the surgery.. 2nd best guess would be a battery issue because I can charge mine fully, turn it on for about 10 min, put ot back on the charger and it flashes all 4 bars like its completely dead.. but there is a number you can call that can help you more than I can, 18005354492
8/30/2022 1:39:16 AM •
Toys
•
Answered
on Aug 30, 2022
We have a french knitter
I know this toy by the name of "knitting knobby". To use, get the knitter, yarn and a crochet hook or cable needle.
Thread the yarn down the center of the knitter until about 10 cm (just under 4") is visible. Wrap the yarn counter-clockwise around one of the spikes on the knitter (not too tightly). Turn the knitter counter-clockwise and repeat the counter-clockwise wrapping of the yarn on each spike. Next wrap the yarn counter-clockwise around the first spike and lift the bottom loop up and over the top loop off the spike so that it falls into the center of the knitter. Leave the remaining loop in place (it will be the bottom loop of the next round). Turn the knitter counter-clockwise and repeat the wrap and lift off of the bottom loop. Pull on the yarn in the center to tighten the work as needed - after a few rounds the weight will help with the tension on the final product. Continue around the knitter for as many rounds as needed to get a desired length of material. Cut the yarn to leave a 10 cm tail and thread the tail through the remaining loops to cast off. Then pull the end tight.
If you wrap the yarn too tightly you won't be able to lift it up and off the spike. An alternative method for the first round is to wrap the spikes twice counter-clockwise and lift the bottom yarn up and over the top loop into the center at each spike.
I hope this helps. Additional pictures and directions can be found with google.
www.how-to-knit-guide.com/french-knitting.html and
www.knitting-and.com/knitting/tips/spool-knit.htm are nice sites.
Cindy Wells
8/19/2022 1:07:33 PM •
Toys
•
Answered
on Aug 19, 2022
Not finding what you are looking for?
