LG Washing Machines - Answered Questions & Fixed Issues

most lg toploaders are direct drive units

LG Washing... | Answered 3 days ago | 23 views

Replace the water inlet valve. It is an electronic tap and yours is leaking.

LG Washing... | Answered on Jun 12, 2020 | 149 views

I would have it repaired. PCBoards don't fail, components that are replaceable, fail.

LG Washing... | Answered on Jun 11, 2020 | 30 views

If your Samsung Washing Machine is displaying a SE/5E error code, it means that your washer is having draining issues

LG Washing... | Answered on Jun 05, 2020 | 28 views

Try this first before replacing any parts or disassembling your LG washer:
- Unplug the washing machine for 1 minute.
- Plug the washing machine back into power.
- Restart the wash cycle.
- The washing machine may now have cleared the PE error code, if not see below...thestoreguide

LG Washing... | Answered on Jun 02, 2020 | 545 views

If your washer fills with water but doesn't agitate, the problem is likely to be a faulty lid switch, a broken belt, or a problem with the motor. ... 1 Check the washing machine's spin cycle. If the spin cycle works, the motor is operating and the belt is not broken

LG Washing... | Answered on May 29, 2020 | 28 views

If the wash, rinse and spin function lights all flash at the same time, this would indicate a possible blockage in your filter or waste / drain pipe.

LG Washing... | Answered on May 23, 2020 | 31 views

How to reset the washing machine:
  1. Press POWER to turn the washer off.
  2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
  3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
  4. Plug the washer back in, or turn the circuit breaker back on.
Download manual

LG Washing... | Answered on May 14, 2020 | 33 views

On some LG front loaders there are two water pumps. One is the normal water pump to remove the water down the drain. The other is a recirculating pump that pumps the water back to the top of the clothes near the front top of the interior. Sounds like this is the model you have. The part is inexpensive about $25-30. Fairly easy to replace. Doubtful you have a plugged line, but possible. Pretty common for a pump rotor to go out. Motor runs, but nothing happens. Personally I would replace the drain pump at the same time, since they are next to each other and both can go out. Try howto videos on repairclinic.com, appliancepartspros.com or youtube. You can find the OEM part numbers on repairclinic and then search eBay for better prices(sometimes).

LG Washing... | Answered on May 12, 2020 | 44 views

no fixing known by us buy a new unit in stainless steel

LG Washing... | Answered on May 09, 2020 | 51 views


LG Washing... | Answered on May 07, 2020 | 41 views

maybe the inlet filter is clogged

LG Washing... | Answered on Apr 30, 2020 | 44 views

Not finding what you are looking for?
LG Logo

Family Lines

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts


Level 3 Expert

85239 Answers

Cindy Wells

Level 3 Expert

6118 Answers

Brad Brown

Level 3 Expert

18360 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides