LG Computers & Internet - Page 3 - Recent Questions, Troubleshooting & Support
My monitor turns off by itself ?
When it first turns on, call up the on screen menu. If it still goes off while using the menu, the monitor has a faulty voltage regulator.
Bush tv not opening USB drives
Several possibilities. Check Bush manual to see if it list compatible formats. All formats are not recognized by all tv's. I am referring to file types. Secondly, check condition of TV ports. Dust may be a problem. Thirdly, TV port may be burnt out. But as you say the drives are recognized, this is more likely your Bush TV does not recognize the file type. You can try converting the file types and see if they then play.
LG Flatron ez t713sh 17" CRT Problem:
I have the same problem, i try to fix it my self. It's seem the horizontal power transistor J5804 has been broken/short. So I replaced with the new one. When i turn on my monitor, the crt's display normally and the blinking power led is become lite on. But when i use it about 30 minute the crt goes black again and the power led is blinking again. Is there anything wrong on the circuits. Please help!
How to configure snmp n Lg mg 300 pbx ?
can we have that in English?
PBX an old land line telephone switching exchange , really>?
why not start a post telling what it is. in clear English.
you posted to computers, is it?
what computer is it, and OS does it run?
what are the symptoms.?
snmp is server that manages resources in the system.
no system stated, or told. (total)
I'd say your system needs service, from local professionals.
How to write a dvd to dvd
use any dvd burning software ... choose option "copy dvd" and after that give the source and destination the same..ie source and destination should be the same..this allows the dvd to make a copy not on the hard disc...and after copying the source dvd, the drive ejects and insert new blank dvd.. and you are done
Lg tv gets no power could the power board be bad
I think that the power board and the power supply inside of your TV might be bad and it would be more easier and cheaper to buy a new TV than to try and repair the one that you have that is broken.
How to unlock power saving mode on my cctv camera's LG monitor
Unfortunately, I can't help you with this issue, because I don't understand it at all. My eldest daughter installed CCTV cameras at my home because she is afraid of me because I am supposedly already old. But then she also installed smoke detectors and water leaks, she is afraid that I may leave the water not turned off or the stove, so she installed them. And in the application from this Ajax company, I monitor the security of my home and, in principle, this application is clear to me, although I am not very friendly with technology.
Hey I have an LG Flatron L1718S screen that work fine for a few weeks then suddenly switch off for a few days ,then switch on again,it's a irritating cycle.Please HELP
- Larry Ng Jul 15, 2021that is just a YEAR 2007 LCD computer monitor, it needs a computer to work. if it fails in a 2nd PC ,
if that test fails,the monitor is bad. (hardward failure, monitor.
the tests are simple,
it fails on 2nd good PC, what can be more simple that test ANY 14 year old monitor on a 2nd good PC.
when dead do this.(test2)
they are all here when dead again use a FLASH LIGHT. (or in UK a low carbon foot print TORCH)<< joking.
https://pcdied.com/monitors_and_screens/...
all monitors older than 2010 do this . (has CCFL inside and that is never fun now)
the cure is newer monitors 2011 to now called LED monitor.s or OLED.
the tubes are cold cathode florescent tubes. (back lamps.) (have 5 classic fail symptoms not just dead)
they are short lived,
laptops and monitors both back then. 20,00hours on the clock and go bad. bank on it.
the 3 failures are CCFL, PSU board, and logic board
#1 is CCFL the all died long ago, on average about year 2003 (07 +5= 12, 2012) at 20,000 yours boom dead.
or intermittent.
PSU is here:
https://pcdied.com/monitors_and_screens/...
below is logic board.
one of the 3 fail, CCFL tubes dead is like 99%
we retire them if the CCFL test fails. (using bench PSU to test them) but you have non of that so. upgrade
-
Larry Ng Jul 19, 2021
logic board. (CCFL tubes dead, PSU dead, or logic board dead) and or thermally failing , and bad.
-
Anonymous Jul 23, 2021
99% of all monitors are all dead. due to those silly low live CCFL back lamps.
or the 2cards inside that can fail too. PSU card +HV CCLF power or the Data card is dead.
99.9% of folks seen these facts, upgrade now.
high voltage inside 600v on the CCFL pins
Not finding what you are looking for?