LG Home - Answered Questions & Fixed Issues
How to clean soiled stain at bottom of oven.
I am generally a wonderful cook and a spectacular baker, and have only ever burned anything a handful of times in my life. BUT. The other day, I was boiling a potato, and it was taking just forever to cook through, so while I was teasing my hair into a giant elegant poof, I totally forgot about it. About a half hour later, my I noticed that my whole house was filled with thick, thick terrible-smelling smoke, and I ran to the kitchen to turn of the stove, dump what was left of my potato, open all of the windows, and apologize to my neighbors.
House Office Carpet Residential Commercial Cleaning Geelong Commercial...
Download driver for LG smart scan
http://www.lg.com/de/service-produkt/lg-MCL1ULOGE# Its in german but you can change it to english or whatever after you find the right file to download.
How do I install my smart scan mouse
computadora prendida insertar la conexion usb en algun puerto usb colocar el disco de instalacion en la unidad dvd y esperar a que la computadora lo instale ...listo
What is a meat tenderizer?
This is used to tenderize meat before you cook it. It makes the meat easier to chew and digest. You can also use it before you boil or fry meat. You can do this mechanically, with something like a meat mallet that cuts up the meat fibres. You can do it thermally by putting the temperature really high to break down the connective tissue of the meat. The last method is enzymatic and uses enzymes to break down the collagen. This method is either slow with dry-aging the meat or you can use fruit to marinate the meat.
4/16/2024 6:28:01 AM •
Home
•
Answered
on Apr 16, 2024
•
833 views
Lost half of my jets on one side of the tub only.I have tried closing the jets that do work half,does not make a difference to the jets not working.Would it be best to empty the tub and start over?
it's likely due to an air lock. Here's what you can do to resolve this issue:
Manually Clearing an Airlock:
Run the jets on low for about 30 seconds.
Then run the jets on high for another 30 seconds.
Repeat this process 3 or 4 times.
If you hear a gurgling sound and see air bubbling up, continue running your hot tub until it pushes all the air out.
If this doesn't work after several attempts, try a different approach.
Bleeder Valves or Pump Method:
Some spas have bleeder valves that allow you to bleed air out of the lines.
First, turn off the spa at the breaker.
Access the pump and loosen the valve to allow the air to escape.
When the air has bled out (you'll notice it turns from hissing air to a stream of water), close the valve.
Run the pump to ensure the jets are now pumping water as expected.
Why Are the Jets Not Working on One Side Only?:
Many hot tubs have two water pumps.
If the jets on only one side of your hot tub stop working, there could be an airlock in only one of the pumps.
It could also be a blockage in the jet lines for that side or a problem with the internal mechanism of the jet itself.
Can You Use a Spa with an Airlock?:
It is not recommended to use a hot tub with an airlock.
4/3/2024 4:33:08 AM •
Home
•
Answered
on Apr 03, 2024
•
903 views
Restarting my marcel hour strike quartz clock nrms603.
To restart your Marcel Hour Strike Quartz Clock NRMS603, follow these steps:
Stop the Pendulum: Gently stop the pendulum from swinging by holding it still.
Remove the Battery: Open the clock case and locate the battery compartment. Remove the existing battery.
Wait for a Minute: Leave the clock without a battery for about a minute to allow any residual charge to dissipate.
Insert a New Battery: Insert a fresh battery into the compartment, ensuring the correct polarity (usually marked on the battery holder).
Start the Pendulum: Gently release the pendulum and let it start swinging.
Set the Time: Use the clock's time-setting knob or buttons to adjust the time to the correct hour and minute.
Your clock should now be restarted and keeping time accurately
4/3/2024 4:30:05 AM •
Home
•
Answered
on Apr 03, 2024
•
593 views
Not finding what you are looking for?