Lexmark Office Equipment & Supplies - Page 8 - Recent Questions, Troubleshooting & Support


Customer Support SUPPORT"; //--> print.jpg Print | email.jpg Email | --> pagelink.jpg Link null.gif KnowledgeBase 433-75x75.gif Product
Product
--> Lexmark Z615 Country / Region:
Country / Region:
--> United States Language:
--> Language:
English Need to download
a driver?
--> Save my information--> Lights Flashing on the Lexmark Z815/ Z816 Color Jetprinter ID: ENUS17112 This document does not apply directly to your Lexmark Z615
  1. First count the number of times the light on the front of your printer flashes.
  2. Then refer to the table below for information about the error condition and recommended recovery procedures.

    Number of Flashes Error Condition Error Recovery 2 Carrier Stall:
    The movement of the print cartridge carrier has been obstructed. Remove any objects blocking the carrier path.
    4 Print Incomplete:
    The print cartridge carrier stopped in the middle of a print job due to obstruction. Remove any objects blocking the carrier path.
    12 Cartridge Short:
    The printer has detected a short circuit in a cartridge.
    1. Turn the printer off.
    2. Open the front cover.
    3. Turn the printer back on.
    4. Remove the color cartridge.
    5. Close the cover. If there are no flashing lights, the color cartridge is short-circuited.
    6. Remove the black cartridge and then reinsert the color cartridge.
    7. If there is no error indicated by flashing lights, the black cartridge is short-circuited.
    8. If you continue to receive an error indicated by flashing lights, both cartridges are short-circuited.

Lexmark Z640... | Answered on Apr 27, 2019


Installation files can be downloaded.

https://bit.ly/2GwirHV

Lexmark Office... | Answered on Apr 24, 2019


Microsoft Paint ----> 'File' -----> 'From scanner or camera' (while the Lexmark is in scan mode). Just tried it and it really works.

Lexmark X5470... | Answered on Apr 12, 2019


Instructions at http://support.lexmark.com/index?modifiedDate=11%2F21%2F11&page=content&actp=LIST_RECENT&id=TE413&locale=en&userlocale=EN_US
may help.

basically, disconnect all cables to printer. Unplug printer.
go get a cup of your favorite beverage. Plug printer to power.
See if it doesn't freeze.

you may also need to power-cycle attached computer

Lexmark Office... | Answered on Apr 09, 2019


I can provideyou with the procedures to default the printer. That may help.
1. start with the printer turned off.
2. Press and holde the GO, Select and the Right Menu Arrow buttons while turning the printer on.
3. Hold the button in until the display show "RestoringFactory Defaults" then let go.
4. The printer should come back to a Ready state.

Lexmark T630... | Answered on Apr 09, 2019


Try to unplug the interface cable from the computer and power up the machine. It is likely the RIP card aka the controller card.
There are two types of controllers for this printer, non-network and network. Here are links to where you can purchase them:
Non-network
Network

Lexmark T630... | Answered on Apr 09, 2019


Try downloading Update "Full" Programme. from Lexmark. Lexmark UK DRIVERS & DOWNLOADS. OS Compatibility Lists · Printer Drivers & Software · Lexmark Toolbar V.4 · Publications & User Guides ...
www.lexmark.co.uk/ - Cached - Similar
Markvision All-In-One Inkjet Contact Lexmark Return your Lexmark empty cartridge Lexmark Global Services Lexmark Genesis Colour Laser Printers Lexmark Toolbar V.4

Lexmark C533DN... | Answered on Apr 03, 2019


1.Turn the printer off.2.Open Front cover.3.Press and hold X button.4.Relese X when the ! LED is illuminated. Note:Be patient as the LEDs will light up in multiple patterns before finaly stopping at !.5.Close front cover. Note:Observe that green button and 3 other LED will be illuminated at the same time.This is Home position.6.Slowly press X button until the 3 first LED are illuminated (paper,toner,light)Note:normaly this will require you to press the X button 11 to 13 times depending on the options and features installed.7. Press and hold green button until all LED flasch or strobe from left to right then relese the button.wait until this process stops with the same pattern as step 6.8.Press and hold X until the light pappern return to the pattern of four LED in theHome position.9.Turn the printer OFF.10.Turn the printer On.Note:if on a DHCP network, wait 30 seconds to see if the DHCP server/router sends out an IP adress to the device.11.Press green button to print a setting pages and observe that all the TCP/IP settings have been reset.12.Reconfigure the device using DHCP.Auto IP(zero configuration) or the IP Setup Utility.
This is my solution to the problem.//Oaklunde

Lexmark E260dn... | Answered on Apr 01, 2019


If your Lexmark printer won't process print jobs, you may be encountering one of several issues. If your computer's print spooler service is not working correctly or not started, your Lexmark print is unable to receive print jobs. The printer may need power cycled to clear out the print job data or paper may be jammed within the printer.
Click "Start" and "Control Panel."
Step
Type "Computer Management" in the Control Panel search box. Double-click the icon that appears.
Step
Click "Services." Click "Print Spooler." Click "Restart" to restart your spooler service. Send your print job again to see if this fixed the problem.


If you are having any Kind of problems regarding your printer and have got stuck in resolving these issues then do not worry. Get connected with our Printer Customer Support Number +1 888 597 3962 and resolve all your issues instantly. We have an Expert and experienced team of technical professionals who can serve the best to provide you the best outcome for your queries.

https://www.customersupportcare.com/lexmark-printer-support.html

Lexmark Office... | Answered on Mar 28, 2019


Your machine is most likely is gummed up. the silver shaft that goes through the carriers is sticky, needs to be cleaned. Or motor for carrier needs cleaned, Or both.

Lexmark Office... | Answered on Mar 27, 2019


I never thought that they will be a miracle on the internet until i came in contact with Priest Babaka, finally i made it with the help with his spiritual power which was recommended by a lady in baby center he help before, i never believe it was real until i confirm it now because i have tried so many things to make sure i get pregnant but no luck, immediately i contact him. he did some spiritual prayers and send me a medicine which i took, i got pregnant three weeks after, and i now have a son to show. thank you so much priest and i recommend Priest Babaka for everyone out there that is willing to have a child of her own out there. contact him for help too he is real and powerful, i have confirmed it, contact him on email: [email protected] or Facebook at priest.babaka

Lexmark Office... | Answered on Mar 18, 2019

Not finding what you are looking for?
Lexmark Logo

Family Lines

31,171 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13434 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Cindy Wells

Level 3 Expert

6099 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...