Lexmark E - Recent Questions, Troubleshooting & Support - Page 9

Hi, I share a informative support links please visit and read it... support lexmark com and http://www.lexmark.com/publications/pdfs/lexmarkc720/eng/othrprob.pdf and Lexmark Printer Support Thanks,

The printer has a service error. There is a rest button below the 6 lights you see. Press and hold the reset button for at least 3 seconds. If that doesn't help.....Turn the main power off and on again. If the condition persists.....the printer may need to be serviced/diagnosed by a qualified technician.

Either the printer will stop and not work until you replace it or the print quality will degrade to the point where you get frustrated and replace it.

This should reset automatically when you purchase a new imaging drum. If it did not,contact Lexmark as they should warranty the new drum unit.

That blinking symbol is a warning. It could be a paper jam, out of paper. Check inside of printer carefully to make sure no bits of paper are holding a flag open.

You may be having a driver problem. Uninstall the product and install again - using the driver that came with the product (on CD or Internet) and not the generic windows driver. This is especially important if you are using it on a network or as a network printer. Also look at the printer preferences: How is it sent to the printer? Try spool then print.

For CS310 models, turn the printer on, press and hold Down and Right, and release the buttons when the installed memory and processor speed displays. For CS410 and CS510 models, turn the printer on, press and hold 3 and 6, and release the buttons when the installed memory and processor speed displays.

40X5168 is for the pick tyres 40X7628 is for paper pick motor drive assembly with motors.

Most likely when you removed the paper jam a small piece of paper got jammed under one of the sensors. This is a very common problem. It is also possible depending on the model that you have dislodged one of the flags that activates sensors for paper travel. Check the back of the printer in the fuser area as these are the most commonly damaged sensors.

The device statistics is found under 'Utilities' in 'Print stats'.

Obviously something is wrong with the cartridge or the chip since it was working before. Try buying a new oem cartridge or even an affordable compatible cartridge online, install it, and I'll bet your problem is resolved.

staples

Lexmark 24015SA Black

need to replace drum or cartridge