Leviton Electrical Supplies - Page 7 - Recent Questions, Troubleshooting & Support

you need a tester first fine out witch wire is hot then go from there

check your water pipe

Each outlet receives power from previous outlet box or switch box in a long chain of parallel wiring back to ceiling box, or junction box, and then back to circuit breaker.Use process-of-elimination to find problem.Locate all boxes on same circuit breaker. Locate box before the two dead boxes... it can be in ceiling light, or switch box, or outlet box. Then test those wires. Look for loose quick connect where wires are pushed into hole on back of device, or loose white wires twisted together and shoved to back of box.http://waterheatertimer.org/See-inside-main-breaker-box.htmlhttp://waterheatertimer.org/How-to-wire-switches.htmlGene If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Copy following links:http://waterheatertimer.org/How-to-wire-combination-switch-outlet.htmlhttp://waterheatertimer.org/images/Combination-switch-outlet-6.jpgGeneh If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Suggest buy duy dimmer that does not need neutral wire, and will only work with incandescent bulbs.Or violate code and use ground wire as neutral.http://waterheatertimer.org/How-to-wire-3-way-dimmer.htmlGeneh If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Check all you linkage assembly on the front Starboard side of the engine.

Do you have combination switch outlet?Copy following link:http://waterheatertimer.org/How-to-wire-combination-switch-outlet.htmlAdd comment with more information as needed.Geneh If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Without seeing it Im guessing. Sounds like one of the small plastic gears inside is off track.There should be like a cover on the outside with 4 screws to open it. Make sure the shaft is turning when the small motor engages.Somethimes they get off track while manually shutting off ice maker manually using the bar

i want two dimmer switch parrel they both fhave two black and one green how fo you wire it up

Just ignore the fact the new device does not have white neutral. While old device has neutralDifference: The new device is rated for incandescent only, while the old device was rated all type of lights including cfl etc.Copy following link for wiring illustrationshttp://waterheatertimer.org/How-to-wire-occupancy-switch.htmlCheck manual for product rating. You might want to return device and buy one with white neutral wire so it will work with your application. If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Your product is not identified by number given.Leviton posts manuals online by searching Leviton xxxx .pdf.There is a CPT 602 lighting consoleHowever no result shows online or at Leviton for a 602 dimmerContact Leviton:http://www.leviton.com/OA_HTML/SectionDisplay.jsp?section=37579&minisite=10251Add a comment and attach photo or video for possible identification If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Single pole switch?http://waterheatertimer.org/How-to-wire-switches.htmlAdd a comment and describe product and application. If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7