Lenoxx Electronics Audio Players & Recorders - Popular Questions, Answers, Tips & Manuals

1 Answer

Hi . My clock radio clock continuously displays

Likely a bad backup battery inside the clock, or a capacitor that is leaking a charge.

Lenoxx... | 79 views | 0 helpful votes

1 Answer

Trouble playing store bought cd's

itll be the lens on the player clean it with surgical spirit

Lenoxx... | 116 views | 0 helpful votes

2 Answers

My portable cd player is acting weird all of a sudden! HELP!!!!

You need to open it up to check the parts inside. First look around to see if there is any plastic parts that are damaged. This might account for the noises inside. If you can not see anything wrong. Get a magnifying glass or lens and look at the lazer lens. Make certain the power is NOT on for any of these tests. If you see any odd light patterns or damage on the lazer lens it will not play discs. Unless it was an expensive model it will not be worth repairing if the lens is damaged. Do not open the unit if the model is still under warranty. In which case contact the maker of the unit.

Lenoxx... | 54 views | 0 helpful votes

1 Answer

How do I remove speakers?

the latch inb the back of ther speaker

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/tony_a41fa0b801734e2f

Lenoxx... | 416 views | 0 helpful votes

1 Answer

How do I remove speakers from CD-1493?

There is a latch on the middle back

Tony

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/tony_a41fa0b801734e2f

Lenoxx... | 365 views | 0 helpful votes

1 Answer

I need a new antenna for model #CD-102

Do you think any of these would work?
5results for ghetto blaster replacement antenna

Lenoxx... | 204 views | 0 helpful votes

1 Answer

Where can I get a new powercord for my cd102?

Does the back of the CD player use either of these cords? If so you can find them right here 483results for PS2 power cord or 28results for PS2 fat power cord

Lenoxx... | 175 views | 0 helpful votes

1 Answer

NEED A PLUG FOR LENOX SOUND CD-109

Does the back of the CD player use either of these cords? If so you can find them right here 483results for PS2 power cord or 28results for PS2 fat power cord

Lenoxx... | 215 views | 0 helpful votes

1 Answer

Where can I get a new power cord for my cd102?

There is a pretty good chance that this boombox uses the same plugs as sony so you should check their PS2 fat cables and their PS2 power brick cables to see if any of those match. Ps2 power cords

Lenoxx... | 101 views | 0 helpful votes

1 Answer

Where can I get a new powercord for my cd102?

Radio Shack sells about half a dozen different power cords. I am not familiar with the Lenoxx cord specifically, but it is a good possibility that they carry one that will work.

Lenoxx... | 74 views | 0 helpful votes

pdf Manual

Lost my power cord

There are about six common cords that fit most items, Radio Shack is a good place to start and most TV repair shops carry power cords

Lenoxx... | 93 views | 0 helpful votes

1 Answer

Replacement power cord for CD-109

Hello

Compare these power cord pictures and get it from any electonic spare part selling shops at your town. It is an easly available part. OK.

Lenoxx... | 322 views | 1 helpful votes

1 Answer

The cd player do not spin it comes on then go off

Hello
The sled motor of your player is not working. This is the motor that spins the disc inside as soon as it has been loaded. But to spin disc, the disc must be loaded properly into the loading mechanism. Just check the loading belt that attached with loading motor and loading gear set for any loose, which may cause improper disc loading. Replace it first. If it does not help you, check the voltage at the seled motor terminals. There must be a voltage [4.5VDC approx:]. If the voltage is there and still the sled motor does nor work, replace it. If voltage is not there, the fault is with the loading IC which is soldered to the main board of the device. OK>

Lenoxx... | 120 views | 0 helpful votes

1 Answer

Cd player only shows

You will need to check the swith that change from Tape to CD to other functions. If the switch is good. Then the next thing is to check for tape function. Can you try to fast forward, reverse. If these functions are working properly then the pinch roller ( the little wheel that is pulling the tape need to be replaced). If nothing moves then you need to replace the belt and the wheel and possible the motor at the same time

Lenoxx... | 133 views | 0 helpful votes

1 Answer

Belts are broken for the

http://www.studiosoundelectronics.com/cassette.htm
You can remove the damaged one and measure it and this site on the link above provides generic replacement

Lenoxx... | 564 views | 0 helpful votes

1 Answer

Power cord replacement Model CD-102

You can find the power cord on the link below
http://www.studiosoundelectronics.com/pwrcords.htm#pwrcords

Lenoxx... | 279 views | 0 helpful votes

1 Answer

I have alenoxx.model 101,how many

Typically these system have two belts, one that runs from motor to pinch roller and the other to the side where it pulls the cassette.
You can order belts on this site
http://www.studiosoundelectronics.com/cassette.htm

Lenoxx... | 72 views | 0 helpful votes