Legacy Car Audio & Video - Recent Questions, Troubleshooting & Support


does your video player support the Mp4 video files? if it can,you can check the resolution is whether right or wrong.if it can not,just use a video converter to convert the videos to the right format for it.Here is the Best video converter i have ever used.

Legacy LDN7U Car... • Answered on Feb 03, 2019


Is there a 20 or 30 amp fuse plugged in to the amp near where the 12 volt connection is? Usually, if an amp blows a fuse: something caused it. You must remove that cause, before you replace the fuse or it will just pop another one

Legacy Car Audio... • Answered on Mar 03, 2018


This Legacy LA 420 amplifier features 400 watts of power, two channels (bridgeable), a two-way crossover, Mosfet power, 2 ohms stable, and THD less than 0.04%. The amplifier measures 10" x 9.5" x 2.75".

Legacy Car Audio... • Answered on Aug 24, 2017


Yes the red could be for power. Yellow for video and orange could be remote/ accessories power. Ground is usually the cover. If there is a way you will screw the screen to the car body, it should work.

Legacy L7M 7.2... • Answered on Mar 10, 2017


Unfortunately, the amp is only 2 ohm stable, so the best option is to connect each subs voice coils in parallel (2 ohms) and connect the subs in series (4 ohms).

Legacy Car Audio... • Answered on Sep 20, 2016


No, but you do need to have the REM connection from the amp connected to the remote turn on line of your head unit.

Legacy Car Audio... • Answered on May 07, 2015


When woofers stop woofing it is because the voice coil is heavily damaged and stuck in the magnet air gaps or there is no amplifier power getting to the unit. Speaker connects need to be checked along with amp power to another known good speaker. If that unit also does not work then there is an amplifier issue that needs addressing.

Legacy Car Audio... • Answered on Mar 12, 2015


if it really uses 1200 watts, that would call for a 140 amp fuse, which is outrageous. for that power, if turly approachable, you would need a v8 engine, and midified alternator(s) arrays, and a capacitor.

Legacy Car Audio... • Answered on Jan 03, 2015


there is a remote on-off power wire that is supposed to connect the amp to an internal circult, which only sends power when the car is on. you can tap this kead off the acc fuse, but the actual power needs to be ran directly to the battery, with an inline fuse under the hood

Legacy LA4299... • Answered on Jan 03, 2015


Back in the day this happened when the signal for FM bets weak. It is worse during day light hours. I don't know if you can boost reception with this.

Legacy LDSN7... • Answered on Dec 22, 2014


i need the wire harness i buy if u what

Legacy LDTSN7... • Answered on Dec 22, 2014

Not finding what you are looking for?
Legacy Logo

184 questions posted

Ask a Question

Usually answered in minutes!

Top Legacy Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5023 Answers

Kenneth Walker

Level 2 Expert

293 Answers

Tom Chichester

Level 3 Expert

61812 Answers

Are you a Legacy Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...