Lasonic Recent Questions, Troubleshooting Help & Support

https://www.fixya.com/support/r29927004-dvd_player_or_cd_player_not_reading ..

To connect an RM-230E remote control to a Lasonic DVD player, you can try the following steps:

1. Make sure that the batteries are inserted into the RM-230E remote control and that the Lasonic DVD player is turned on.
2. Press and hold the "Code Search" button on the RM-230E remote control until the indicator light turns on.
3. Press the "DVD" button on the remote control.
4. Press the "Power" button on the remote control. The indicator light on the remote control should blink once.
5. Release the "Code Search" button. The indicator light on the remote control should remain on.
6. Use the number buttons on the remote control to enter the code for the Lasonic DVD player. The code can be found in the manual or on the manufacturer's website.
7. Press the "Enter" button on the remote control. If the code is correct, the indicator light on the remote control should turn off, indicating that the remote control is now programmed to the Lasonic DVD player.
8. Test the remote control by pressing the various buttons to see if they are working correctly.

If the above steps don't work, you may need to try a different code or consult the manual or the manufacturer's website for further troubleshooting steps. It's important to note that the steps and the codes may vary depending on the brand and model of the Lasonic DVD player, so it's best to consult the manual for the specific instructions.

Please contact the manufacturer for parts thanks.

Very likely needs antenna. Unit probably looking for strong stations

If the laser is faulty and cannot read anything on the disc it will not start the motor

DVD players are dirt cheap now. Just buy a new one, and if your TV has HDMI, get one that will hook up that way.

you have to plug everything to the tv. only thing them are good for is recording to some other unit. like dvd recorders

Hi,

It only plays Tapes.


Thanks.