Laser Office Equipment & Supplies - Page 3 - Recent Questions, Troubleshooting & Support

Dear As the OS is different do load the driver at vista pc. Thanks.

First, check the fuser. It should be hot to the touch (be careful).

Dear You can choose any printer having printing resolution more than 600 DPI. For screen printing the jobbers prefer for resolution from 300 DPI to 600 DPI. Thanks.

Dear Rajendra You can choose any laser printer with printing resolution 600-1200 dpi. According to the type of toner non-magnetic toner will perform the best and lasts long without deterioration of its color. Before buying the choosed model you may download the driver and verify the setting procedures to confirm. Also if you are going for prepare for master the driver setting should have option for lower the dpi up to 300 , in case of screen print application. Few manfs are hp,canon used magnetic toner where as samsung,brother,konica minolata etc. are used non-magnetic toner on their low/ middle segment. Thanks.

you have to replace your transfer unit

Check belt in the ADF( Auto Document Feeder) if belt is fine you may need to replace the rollers

You need to program the paper size for the trays

check and see all the perimeters, are in sync, check and see if its set to bi directional, jam paper in the feeder, and if you have more than 1 printer, check and see if it`s on the the correct printer If you need further help, reach me via phone at https://www.6ya.com/expert/reginald_d1f35dc049b0256a