Laser Measuring Tools & Sensors - Recent Questions, Troubleshooting & Support


Laser Measuring... | Answered on Jun 10, 2020

The RL-HB was only a self leveling laser and the newest Topcon equivilent would be the RL-H5. A higher spec and with a grade function.

Laser Measuring... | Answered on Oct 23, 2019

Are you certain that you have replaced the batteries in their correct orientation? There is usually a symbol or small icon that shows the + and - positions of the batteries. Also, if you have put in new batteries, could the old batteries have leaked and corroded the contacts? This would need to be cleaned first before the batteries can make a good electrical contact. Best Wishes!

Laser Measuring... | Answered on Sep 07, 2019

From the manual;
Problem - Vacuum base won't stick to wall.
Possible Cause - Surface is incompatible for vacuum.
Solution - Use rough surface adaptor on stucco
and textured surfaces

Laser Measuring... | Answered on Jun 10, 2019

You don't fix these, no parts to do so are available.

Laser Measuring... | Answered on Jun 23, 2017

i have had a look around the internet but can not find anything..have you tried looking on amazon or ebay.

Laser Measuring... | Answered on Dec 12, 2016

Would it need a new battery? If so replace at

Laser Measuring... | Answered on Jul 12, 2016

Wayne, unit is probably damaged inside, if a good one(expensive) you will have to have electronic tech. look at it.

Laser Measuring... | Answered on Feb 21, 2016

take the battery out of the back of the laser

Laser Measuring... | Answered on Jul 03, 2015

Not finding what you are looking for?
Laser Logo

24 questions posted

Ask a Question

Usually answered in minutes!

Top Laser Measuring Tools & Sensors Experts


Level 3 Expert

85239 Answers


Level 3 Expert

8546 Answers

Are you a Laser Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides