Lanzar Car Audio & Video - Answered Questions & Fixed Issues
I have a lanser 4000 outputting loud engine noise
Double check your connections. Sounds like you are picking up alternator whine. Make sure the rca cable is at least 12" away from power and remote cables when installing fem radio towards amp. Its best to runthem on opposite sides.
.A thumbs up would be greatly appreciated if this answer is helpful to you.
I have a opticap500 capacitor and trying to instal...
The spark is normal since at the initial time of the connection, the capacitor has 'zero' ohms. As it charges, less and less current flows until it is fully charged.The only way to 'pre-charge' a capacitor is to connect it to power.You can put a resistor in series and slow the charging rate and thus the spark will decrease/go away.Pick a high ohm maybe 1watt resistor, put it in series and go for it.
Can a back-up camera be installed in a lanzar sdn695 bt if yes how to do thanks ted
sure can !! this head unit has three composite video input jacks on back of unit (three stereo sound jacks as well) if your only using say one of them for your dvd or vcr then that leaves you one to plug in a back up camera , it of course is sold separately , but any good composite output camera will do , and of course wire needs to be long enough to reach from rear bumper to lanzar head unit in dash , so be mindfull of that , after its all connected just select composite input you have it connected too , and violia !! there your view of what's behind you !! a rather neeto thing to do is connect two cameras to your spare inputs , one front and one back , if the front camera is infared enabled , it will help you see thru bad weather !!!!as infared isn't encumbered by using viable light that gets all scattered in fog and heavy weather , that's how helicopters land in bad weather !!
10/15/2016 1:26:06 AM •
Lanzar SDN695BT
•
Answered
on Oct 15, 2016
•
77 views
Not finding what you are looking for?