Lakewood Dryers - Recent Questions, Troubleshooting & Support

normally black hot white neutral green ground

Lakewood Dryers | Answered on Sep 16, 2020

Unlikely I would think, a new motor will be available considering how the motor is a major part of the construction and how quickly new models replace previous models in the typical fan line up, even in the heavy duty and industrial types.

Many fans use a brush type motor and after extended use the brushes will need replacing - have you had the motor checked? It might just need new brushes.

If all else fails, there are small companies all over the world offering to rewind burned out motors, some specialise in the repair and rewinding of small motors, mostly to keep cherished or special power tools alive.

Lakewood Dryers | Answered on Apr 20, 2020

Whether the fan has a dedicated oscillation motor or is driven by an extended shaft from the main motor, there is usually a button or switch to disengage the oscillating function. If this no longer has any effect the only cure is to dismantle the machine until the fault is discovered and then if a repair is possible - repair it...

Most domestic fans have no spare part support, mechanisms have a limited life and if "handyman" repairs aren't possible it is considered a throw-away item.

Lakewood Dryers | Answered on Aug 21, 2019

hello martin you can buy a dimmer to slow down your fan
800 watt at least

Lakewood Dryers | Answered on Apr 30, 2019

way to go tom
posted to HP Compac forum on computers
I moved you and the OP out of computers
that is why noboby can understand you, and then answer wrong.
amazing no>
and yes don;t come back. that is always a good idea (sarc off)
what not ask Lakewood this, it is there fan, not ours,
we dont make fans at fixya, not yet. maybe next week?
there is no lack of hot air here, as is on all forums.
my guess the motor start capacitor is bad.
call lackwood and ask for that or schematic or BOM or parts list
see what they say,
many things now, are throw-away. with no support at all.
ok I google for you
and here the are, ask them, its there design.

Lakewood HV-9/C... | Answered on Jul 31, 2018

ok If you take the info I asked for grainger is able to cross refrence it for you in case they dont have the particular model#

Thanks hope this helps Ya

Lakewood MC-42... | Answered on Jul 26, 2018

How do clean the lakewood mini tower fan model MTF 15

How do clean the lakewood mini tower fan model MTF 15

Here is what one said:
"To clean it, you will need a small paint brush, screw driver either flat or crossed, then disassemble it. Loosen the screw and just be observant what you put apart. Then clean it. Good"

You may want to take it to a gas station and REALLY clean it out? OR a aerosol canned "AIR DUSTER" will be very useful too!


Lakewood Dryers | Answered on May 20, 2018

Not finding what you are looking for?
Lakewood Logo

366 questions posted

Ask a Question

Usually answered in minutes!

Top Lakewood Dryers Experts


Level 3 Expert

85239 Answers

Vernon Taylor

Level 3 Expert

7167 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

34928 Answers

Are you a Lakewood Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides