La Crosse Logo

La Crosse Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 94 Products
  • 545 Answers

This is the model with the exposed button on the right side. The back does not come off, but the front does! If you use a loop you may be able to see a notch between 7 and 9 O'clock. Be very careful because the gasket keeping the watch water resistant is right there. You do not want to harm it. I put the watch in a holder and place a very thin jewelers screw drive on the side. With a jewels hammer I tap lightly until the front comes off. You must then carefully remove the movement from the case and not touch the hands. In order to close the watch after battery replacement, a watch press is a must. Without the press, you won't get the watch closed. The manufacturer suggests taking the watch to a qualified professional. You can send it to the manufacturer as well and they will change the battery for you. The Manufacturer is La Crosse Technology in La Crosse Wisconsin.

La Crosse... | Answered on Jun 29, 2019

put them close together for a while. fresh lithium batteries are a must for the outdoor unit

La Crosse... | Answered on Jun 28, 2019

Manual doesn't help. I changed the battery but the watch is still not powering up.

La Crosse XG-55... | Answered on Mar 20, 2019

Go through the user Manuel and see the instruction and see how to replace the battery :
No we don't touch with a metal there is no need to do that :

La Crosse XG-55... | Answered on Mar 20, 2019

If you have storm windows, put it between the window and the storm window.

Or try just below the overhang of your house.

La Crosse... | Answered on Feb 25, 2019

Without specifics: Here is a good start for troubleshooting:

La Crosse... | Answered on Feb 08, 2019

You had a loss of power at some point reset it,.

La Crosse... | Answered on Jan 27, 2019

i suggest you download the instruction manual from lacrosse

La Crosse... | Answered on Jan 03, 2019

1) Does the remote have batteries? See other posts that describe how to do this (4 screws in back need to be removed). Temperature should be displayed in small window of the sending unit if it's working.
2) Hold Channel button for 3 seconds until it beeps - the unit then searches for a signal.

La Crosse... | Answered on Dec 16, 2018

Hello, William -

If you are asking about a La Crosse Technology Atomic Clock, then . . . see the instructions (24 page PDF document, Adobe Acrobat Reader software - free - needed) here:

Best wishes.

La Crosse Radio... | Answered on Nov 04, 2018

mcdevito75 here, Contact Lacrosse watch, online at Lacrosse or by phone at 800-380-5056 with your request.

La Crosse... | Answered on Oct 03, 2018

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top La Crosse Experts

The Knight
The Knight

Level 3 Expert

76352 Answers

Cindy Wells

Level 3 Expert

6099 Answers

Tom Chichester

Level 3 Expert

55379 Answers

Are you a La Crosse Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides