Kymco Health & Beauty - Page 3 - Popular Questions, Answers, Tips & Manuals

Question edited for clarity to what I think you meant to say. Maker Support. It would be useful if they had an online manual. The freewheel lever is normally below the seat near the driven wheels https://www.mobilitypower.co.uk/product/jh500/ Check out page 12 of this maker's manual https://www.mobilityscootersplus.com/downloads/1552513072freeridercityranger6and8ownersmanual.pdf ..

The most likely reason is that you lost 6 pounds in hospital due to the wonderful food. :>D There are a couple of things you can do. Take the scale to your doctor surgery and compare your scale against theirs. Take the scale to the supermarket and put 2 x 10lb bags of flour on it or 7 x bags of 2lb sugar bags. They can recalibrate

Customer Support

Homedics https://www.homedics.com > customer-support Homedics Customer Support section includes our contact information, downloadable instruction books, FAQs, how-to videos and more. Get help today. ‎Parts and Accessories · ‎2-Year Limited Warranty · ‎1-Year Limited Warranty ..

'power pack'? Do you mean the battery or the battery charger? Depending on the make, some are 12 volts, but some are 24 volts.And by 'run an 8 amp mobility charger for 8 hours' is also ambiguous. Do you want a charger that will charge in 8 hours, or do you want batteries that will run the scooter for 8 hours.All questions need 'make model (what is is)' as first 3 words. I can answer all your questions given that information. Click Comment under this message, don't make another post. You can also Edit that information into your question or I can if you answer within a couple of hours.

Read the label.

Some say it can, others dissagree.

Question edited for clarity and toss in some CAPS. Contact them for a Warranty Claim. Croc Professional Hair Tools - Croc Flat Iron Croc Officialhttps://www.crocofficial.com Shop The Professional, Ergonomic, and Elegant Hair Tools. Free Shipping With Any Purchase Over $49.99. ‎Flat Irons · ‎Infrared vs Non-Infrared · ‎Curling Irons · ‎Blow Dryers · ‎What's New ..

If it uses the old style flourescent lamps they use a ballast choke and they can buzz as they age.

If your Dalton Primechair is not receiving power from the control arm, there could be several reasons for this issue. Here are some troubleshooting steps you can take: Check Power Source: Make sure the chair is plugged into a working power outlet. Check the power cord and ensure it is securely connected to both the chair and the electrical outlet. Power Switch: Verify that the power switch on the control arm is in the "ON" position. If there is a separate power switch on the chair's body, ensure it is also turned on. Batteries (If Applicable): If the chair uses batteries, check if they are properly installed and functional. Replace the batteries if necessary. Remote Control (If Applicable): If the chair comes with a remote control, ensure that the batteries are installed correctly and that the remote is functioning. Fuse: Check if there is a fuse in the power supply line or within the control arm. If the fuse is blown, replace it with a new one of the same type and rating. Wiring Connections: Inspect the wiring connections from the control arm to the chair. Look for any loose or disconnected wires. Reconnect any loose wires securely. Faulty Control Arm or Power Supply: If none of the above steps resolve the issue, there may be a fault in the control arm or the power supply system. Contact the manufacturer's customer support for further assistance. They may provide guidance on troubleshooting or recommend professional service. User Manual: Refer to the user manual for troubleshooting tips and specific instructions related to the Dalton Primechair. If you are unable to resolve the issue with these steps, it's advisable to seek assistance from the manufacturer's customer support or contact a professional technician who is familiar with the specific model of your chair.

Less than 10 amps, but it has its own internal battery which is charged when the vehicle is running and there is no drain when the vehicle is switched off. https://www.1otg.com/Brochure/Joey%20Spec%20Sheet.pdf https://www.google.com/search?q=joey+bruno+wheelchair+lift+battery ...

Depends in which type or model of equipment. Otherwise it could mean anything.

What brand name is the scale?

Postal scale, bodyweight scale, kitchen scale, every scale ever made? Turn it over, look for a door or a screw, unless it is the only Taylor Scale that has a sealed for life battery and is not replaceable. 'make model (what it is)' in all questions, first 3 words please. ..

They are not normally capable of recalibration. You need a very special certified calibration weight. They are done at the factory and that is it. As long as the scale is on a flat level, firm surface they should be good. Full 'make model (what it is)' in all questions please. We can search and see if it is a known issue and if the company are recalling them.

They have a smart controller so it should display codes. Batteries connected correctly and fully charged? https://www.google.com/search?q=pride+jazzy+error+codes ..

If the joystick on your power wheelchair remains inactive even after charging, several issues may be at play. First, check if the charging process completes successfully, ensuring the battery is fully charged. If the joystick power persists to stay off, examine the joystick's connections and cables for any damage or disconnection. Additionally, inspect the battery terminals, ensuring they are clean and secure. If these steps don't resolve the problem, it may indicate a malfunction in the joystick itself, requiring professional diagnosis and potential replacement. Consult the wheelchair's user manual for specific troubleshooting steps or contact the manufacturer's customer support for guidance.

Repairing a leg massager depends on the specific issue it's facing. Here are some general steps you can take to troubleshoot and potentially repair a leg massager:

1. Check the Power Supply:
   • Ensure that the massager is properly plugged into a working power outlet.
   • If it's battery-operated, make sure the batteries are charged or replace them if necessary.
2. Inspect the Power Cord:
   • Examine the power cord for any visible damage or fraying. If you find any issues, you may need to replace the cord.
3. Review the User Manual:
   • Refer to the user manual that came with the leg massager for troubleshooting tips and instructions.
4. Test Different Modes and Settings:
   • If your leg massager has various modes and settings, test each one to see if the issue is specific to certain functions.
5. Check for Obstructions:
   • Ensure that there are no obstructions preventing the massager from functioning correctly. Sometimes, foreign objects can get caught in the moving parts.
6. Inspect Mechanical Components:
   • If you're comfortable doing so, open the massager (if possible) and inspect the mechanical components. Look for any loose or broken parts. Be cautious not to void any warranties.
7. Look for Loose Connections:
   • Check for loose wires or connections inside the massager. Reconnect any that may have come loose.
8. Contact Customer Support:
   • If your leg massager is still under warranty, contact the manufacturer's customer support for assistance. They may provide guidance on troubleshooting or offer a replacement.
9. Professional Repair:
   • If you are unable to identify or fix the issue yourself, consider taking the leg massager to a professional technician or contacting the manufacturer for authorized repair services.

Question edited for clarity. Page 53 of the manual refers. When in doubt, it's a good read! 4 flashes: The right hand motor has a bad connection https://www.hoveround.com/media/wysiwyg/pdf/MPV5-owners-manual-rev-U-0718_8-20-18.pdf.. ..

It is an easy fix, I have done it myself. I used an electric car tyre inflator. I also repressurised and small hand held car fire extinguisher.

You murdered the spelling! :>D Question moved from Laundry Dryers. No manual for that one but one of the links has Montego Bay Manuals https://www.google.com/search?q=montego+bay+celebrity+16+manual ..

Are these blades broken or just blunt? Can you comment below with a photo of the blades you have? Some of the blades on these machines can actually be re-sharpened. A fine file or a small sharpening stone can put an edge back on them. A little bit of time and effort and you don't have to go parts hunting for a few more years.