Krups XP - Recent Questions, Troubleshooting & Support - Page 2
Dead No power
Hello
You can get replacement parts here
http://www.belstar-electrics.co.uk/
they are very good and will help
How to disassemble espresso machine.My gasket leaks
i think its not a gasket problem may be broken pipe or broken thermal block if you have a broken pipe it is due to not cleaning the filters you get an over pressure on the internal pipes and bingo water come out be wear of electric
XP2280. Where can I obtain an owner's manual?
www.ehow.com > Home
Krups XP1500 Instructions. The Krups XP1500 is a coffee machine and espressomaker with a 10-cup coffee capacity, pause and serve feature, non-stick ...
www.manualslib.com > ... > Coffee Maker > XP1500
Translate this page
View and Download Krups XP1500 user manual online. Krups XP1500: User ... Coffee Maker Krups ESPRESSO COMBI XP1600 User Manual. (51 pages).
www.manualslib.com > Brands > Krups Manuals > Coffee Maker > 867
Coffee Maker KRUPS ESPRESSO NOVO 2100 PLUS Instructions For Use Manual ...Coffee Maker Krups XP1500 User Manual ... stronger brew than regular grammablecombination ber to NEVER open the coffee, espresso, and coffee.
Neither water nor steam coming out from never used espresso machine.
From the sound of your You Tube clip the pump is running but it's probably dry and not pumping for some reason. Before I pulled it apart I would try and force some water into the pump. You may find that a piece of garden hose is roughly the right size to engage the tank seal. About a foot of it should be enough, engage the hose, fill it with water, operate the pump like you did in the video and blow as hard as you can into the top of the hose. With sealed lips like you are filling a balloon. If that doesn't work then I think you are doomed and will need to open it up and find where the water stops.
Pump won't stop pumping
It sounds like the electronic PCB has failed and is supplying current to the pump all the time. It's not the sort of repair that a homeowner would be wanting to tackle. They are not made with ease of repair in mind. I would advise getting a quote from an authorised Krups service agent or just binning it.
Need manual
Go to http://www.krups.co.uk/user-instruction Put in 4000 as your search....select download for PDF file.
Krups automatic espresso machine error 0E
You need a special Torx screwdriver to access the insides of this machine, T10 and T15 from memory. Your best bet is to find a proper service agent who has experience with this model, they are NOT simple to work on. There are a lot of repairers who will not take them on so choose someone who is happy to do it and has experience on them. Best person would be whoever does them for Krups in your locality. The failure is nothing at all to do with you, it was going to happen no matter who was using it. The luckiest fault I can think of for you is a broken O ring seal on the tamping piston, you only need the top off to fix that. If it is that seal buy the correct part, they are quite a soft seal by comparison the what you get in a box of assorted O rings.
Not finding what you are looking for?
