Krups Coffee Makers & Espresso Machines - Recent Questions, Troubleshooting & Support


circuit board need resetting

Krups XP7225... | Answered on May 14, 2020


Plug it in, turn it on and then within 3 seconds touch each of the 4 corners on the touch screen in this order Top left, Bottom right, Bottom left, Top right that should open up the settings options for you, follow your nose after that.

Krups Ea9000... | Answered on Apr 17, 2020


It can cause problems if it doesn't work correctly. To test the thermostat in a drip coffee maker: Step 1: Unplug the unit, empty excess water from the reservoir, turn the unit over, and remove the base. ... Step 3: If defective, remove and replace the thermostat with one of the same rating.

https://home.howstuffworks.com/how-to-repair-small-appliances3.htm

Krups Coffee... | Answered on Apr 01, 2020


Tenho uma krups ea8010 aparece c?digo de erro 05 s? pede a manuten??o e ficam as luzes todas acesas j? fiz todo o processo de limpeza e n?o sai dai

Krups XP4030... | Answered on Mar 31, 2020


Error code 5 is a result of one of the following:

Blocked water circuit (water meter, pump, distributor, distributor motor, microswitch)

Krups Coffee... | Answered on Mar 10, 2020


Hi! Did You fixed the problem? I got same error and have no idea whats the point :(

Krups Coffee... | Answered on Feb 17, 2020


That model had a likelihood of the electrovalve growing a green crystal inside the fitting where the teflon tube comes from the boiler. The electrovalve is a solenoid operated tap on the steam wand side accessed by removing the lid and the side cover. I used to take the electrovalve off completely to do the job. To get the teflon tube out you depress the silver collar around the tube towards the fitting and pull on the tube. It won't come out unless you depress the collar. You then unscrew that same fitting and clear the green crystal out with a probe or screwdriver and rinse or blow the fitting out. The fitting was sealed from new into the electrovalve with some sort of sealant product, I used to clean out the threads and use some thread tape, I never had a leak and did heaps of them over the years.

Krups Coffee... | Answered on Nov 07, 2019


Found on the internet:

Try this, remove the tank, the drip tray, the bin on the side and the sliding thing above the bin. Hold down the on and steam buttons while plugging the machine into a live socket, it's either that or the same again but holding down the on button and the program button while plugging it in. You will get a screen that says something like " Remis a something vende" which is French for put it into sale state, you choose "Oui" for yes Hope this helps

Krups Coffee... | Answered on Oct 30, 2019


I found this on the internet:

Try this, remove the tank, the drip tray, the bin on the side and the sliding thing above the bin. Hold down the on and steam buttons while plugging the machine into a live socket, it's either that or the same again but holding down the on button and the program button while plugging it in. You will get a screen that says something like " Remis a something vende" which is French for put it into sale state, you choose "Oui" for yes

Krups Coffee... | Answered on Oct 30, 2019


Google (krups)(171)(manual) without parens OR contact Krups directly to request it.

Krups Coffee... | Answered on Oct 26, 2019


could be clogged pump or bad pump, I have also seen where you need to let the water reach a certain temp. before it will begin to brew

Krups KM4065... | Answered on Oct 22, 2019

Not finding what you are looking for?
Krups Logo

Family Lines

2,329 questions posted

Ask a Question

Usually answered in minutes!

Top Krups Coffee Makers & Espresso Machines Experts

Charles Tidwell

Level 3 Expert

475 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Ross Keen

Level 3 Expert

1364 Answers

Are you a Krups Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...