Krell Audio Players & Recorders - Recent Questions, Troubleshooting & Support

Iwant the schematic manual for krell showcase 5 ... tank you ...

Krell Showcase 5... | Answered on Mar 21, 2018

try subbing out another newer speaker for the left one ? if sound returns then that older speaker is defective .

Krell Audio... | Answered on Nov 12, 2016

Fuses rarely go on their own. The cause is likely to be a shorted semiconductor device in the left channel output.
Fuses are generally not specific to any brand. Is the fuse a tube with metal ends? If it is measure the length in MM. Then look at the end and you should see the rating. Either in A for Amps or MA for milliamps.
Any electronic parts supplier should have the one you want in stock. Buy several, for if the part I mentioned has gone, it will blow again.

Krell Audio... | Answered on Sep 16, 2016 Look on page 18

Krell Audio... | Answered on Sep 10, 2016

You should be able to figur that out but first read the instructions they contain some amazing information. I can not help you because I have no idea of what you are asking.

Krell KAV-300i... | Answered on Nov 27, 2014

AC orinternal DC rail fuse?

Krell KAV2250... | Answered on Nov 14, 2014

Thai will require removal of the top cover to move jumpers or program dip switches in proper order. This will be explained in the owners manual which is located at Krells web site.

Steven Leckrone
The Service Department
30 Unquowa Hill St
Bridgeport CT 06604
[email protected]

Krell Audio... | Answered on Nov 14, 2014

If you're able to switch between them then your issue is possibly relay, relay driver or microprocessor related; all of which require a service techs attention. hope this helps. Gene

Krell KAV-300i... | Answered on Jun 16, 2014

Chances are that you have a "Leaking" capacitor in the final stage.

Time for the repair shop :(

Krell Audio... | Answered on Jun 14, 2014

unless you have schematics and are gifted with a soldering iron, needs to be repaired.

Krell KAV-300r... | Answered on May 31, 2014

Audio output section circuit draws enormous current at idle stage. Contact any service electrician to detect the fault and get it repaired. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. Surf the site with patience. Pull up older posts.

Krell Audio... | Answered on Apr 01, 2014

Sound as if you have a low voltage, check for 220 v if its ok, then you have a current problem, the higher the voltage, it will be less current flow. Hope its not a flaw on the 220 v side

Krell Showcase 5... | Answered on Dec 30, 2013

Not finding what you are looking for?
Krell Logo

55 questions posted

Ask a Question

Usually answered in minutes!

Top Krell Audio Players & Recorders Experts


Level 3 Expert

5699 Answers

Gil Shultz

Level 3 Expert

3388 Answers

Lawrence Oravetz

Level 3 Expert

10543 Answers

Are you a Krell Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides