KLH Logo

KLH Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 109 Products
  • 696 Answers
  • 113K Views

Hi, you must check the user guide to find fuse rating or check the blowed fuse for current rating, for a DVD/Bluray player it could be about 2A /120V AC..

KLH Televison &... | Answered on Jul 08, 2015


Unplug your headphones

KLH Kl-2400... | Answered on Jun 30, 2015


Please refer to user guide specs about your Turntable for the Output type That is MM or MC (Moving Magnet or Moving Coil) then on the receiver look for PHONO input and interconnect

KLH Audio... | Answered on Jun 26, 2015


Wrap a wire around the outside Metal of your rca jack in back of your radio and ground the other end of that wire to the back of your radio and the noise goes away

KLH Audio... | Answered on May 09, 2015


Search the web , there are countless sites. Try ebay.

KLH R3100... | Answered on Apr 17, 2015


Go back into the set up and factory set it then go back through the end user set up again. Sony bipass code is 7774 for parental control Not sure where that 1s made. That dont work track down the customer service number for the manufacture

KLH DVZ-2500... | Answered on Mar 23, 2015


I would fit the same type, unless the schematic shows a change, which clearly it doesn't. However I would be surprised if R42 burnt up alone! Look at the schematic, is R42 linked to any other transistor or part? If so check them if you can.
By the way is R42 a fuseable resistor, for example is the symbol on the schematic or on PC board different to most other resistors?

KLH ASW10-120... | Answered on Mar 16, 2015


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

KLH Televison &... | Answered on Mar 15, 2015


Yes, the 10-120 can use a L & R low level subwoofer input. You can get a short 6" RCA splitter adapter from Radio Shack for a under $10. (1 female input, 2 male outputs) Alternately, just plug the subwoofer output on your receiver to just the low level R channel on the KLH sub.

KLH Audio... | Answered on Jan 21, 2015


This model has a high failure rate with the power supply board. Typically, power resistors fail, which in turn burns out the big capacitors.

I have not heard of transformers failing though, so it shouldn't be too much to repair it.

Here are the schematics for the unit: Upper board and Lower board

KLH ASW10-120... | Answered on Jan 18, 2015


make sure you have the speaker connection right if you do then it is a ground problem try plugging it in a different outlet

KLH HTA-4906... | Answered on Jan 17, 2015


There is a small plastic plug just above the power cord. Remove it to find the fuse.
http://product-images.highwire.com/4442801/6385-5.jpg

KLH ASW10-120... | Answered on Jan 07, 2015

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top KLH Experts

The Knight
The Knight

Level 3 Expert

76352 Answers

ray gallant

Level 3 Expert

67943 Answers

Tom Chichester

Level 3 Expert

55379 Answers

Are you a KLH Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...