KitchenAid Ovens - Page 7 - Popular Questions, Answers, Tips & Manuals

Then one of the micro switches either has failed or has slid out of position

Most wall ovens have a cooling fan that comes on when the oven has been on for some time. It is separate from the convection operation. It should shut off after the oven has been off for a time.

Sounds like the touch control pad is bad.

See if the door is crooked, low, or something is blocking it.

HINGES WHERE PART NUMBER ENDS ON 6 - THEY TIGHTER

replace the bulb with an appliance bulb found at any store that sells bulbs

Did you replace the thermal fuse on the back of the oven or the one in the control panel?

I had another brand with that fault from new. We disconnected the probe wiring from the control board and it stopped looking for it.Also, could be a setting has been changed inadvertently.

technically yes, but bad idea.....will warp door

You can't. Only a professional should do this

thats hinges replacement job in my video.

the is an external fan which draws all the moisture away,pull oven out and follows the two wires frm the and make sure both are connected and connected so it is alive when oven is on, if good the probaly a faulty fan

f5e1 is a door locking error. try shutting off power for a minimum of 2 minutes to reset the control board. If you still get the error replace the latch. Here is the part to order.

This is what I used on my Kitchenaid Superba maybe it will work on yours also. Hold the "oven light" then push the "CLEAN" button and then the "START" button. Wait until "Door Locked" shows on screen. Press "Cancel/Off" (Upper Oven) wait until "Door Locked" turns off. The oven F5 E1 is now fixed.