KitchenAid Kitchen Ranges - Popular Questions, Answers, Tips & Manuals


That is probably the SAbb code; the Sabbath mode has been set. This mode allows you to heat a meal while fulfilling the "no work" requirement for strict observance of the Sabbath. The oven will stay at the programmed temperature until you change the temperature or end the Sabbath mode. To end the Sabbath mode, open the oven door and press and hold 6 for 5+ seconds. Then close the oven door.

Searching Kitchenaid's support site, https://www.kitchenaid.com/service-and-support/manuals.html , I found the manual for the KESC307 ranges here: https://www.kitchenaid.com/content/kitchenaid/en_us/searchresult.html?term=KESC307&tab=clp&plp=&plpView=grid&clp=kesc307 . The direct link to the manual is https://www.kitchenaid.com/content/dam/global/documents/200308/owners-manual-9754287-RevC.pdf . See page 18-19 for the information on the Sabbath mode. You can completely disable the option on the range by following the steps in the manual.

I hope this helps.

Cindy Wells

KitchenAid... | 25 views | 1 helpful votes


I didn't see an operator manual using https://www.google.com

There were several diagrams and parts lists.

An installation manual and a toll free number to call for support is at the link below:

https://www.partselect.com/Models/KESH307HBS4/

KitchenAid... | 125 views | 0 helpful votes


Have you unplugged the appliance I reset it see if that clears it

KitchenAid... | 131 views | 1 helpful votes


Same here. I am in trouble like that. Need to find a solution!

Best,
http://giaydankinhgiahuy.com/

KitchenAid... | 123 views | 0 helpful votes


Is it an electronic unit or piloted unit

KitchenAid... | 177 views | 0 helpful votes


Odds are that element is bad and needs replaced some minor testing needs to be done to know for sure. I have attached a picture of the elements as they are different depending on position. #12 is the part. Sears parts direct can get you the part numbers.
cooktop-eh5jesptcuvogop024kl2gvy-2-0.png

KitchenAid... | 176 views | 0 helpful votes


Have you tried running the exhaust fan when using the stove? Also you might try using the back burners. It sounds like the microwave is sitting too low and this may cause more issues as the time goes on.

KitchenAid... | 128 views | 0 helpful votes


It is usually located on back wall of unit behind removeable metal panel. Unplug before servicing.

KitchenAid... | 221 views | 0 helpful votes


Do you mean the KGSS907SS01? Kitchenaid ranges usually don't have three letters before the last two digits in the model number.

If so, all you need to do is press the Clock Set/Start keypad (below the 7) and then type in the current time. Then press the Clock Set/Start keypad again. The range uses a 12-hour clock.

I found the Owner's Manual at Sears Parts DIrect: https://www.searspartsdirect.com/partsdirect/user-manuals/kgss907sss01-kitchenaid-parts-manual . The instructions for setting the clock are on page 12. The direct link to the manual is currently https://c.searspartsdirect.com/mmh/pd_download/lis_pdf/OWNM/L0809512.pdf . Manuals Lib does list a KGSS907SSS model. The manual is available here: https://www.manualslib.com/products/Kitchenaid-Kgss907sss-30-Inch-Slide-In-Gas-Range-12919.html . The directions for setting the clock are the same.

I hope this helps.

Cindy Wells

KitchenAid... | 105 views | 0 helpful votes


Maybe or othe electric components..unplug bfor lookn. Library has repairbooks

KitchenAid... | 111 views | 0 helpful votes


I just started 6 weeks ago and I've gotten 2 check for a total of $2,200...this is the best decision I made in a long time! "Thank you for giving me this extraordinary opportunity to make extra money from home. This extra cash has changed my life in so many ways, thank you!"---
Visit site: w­­w­­w­­.SalaryHD­­.­­C­­o­­m

KitchenAid... | 66 views | 0 helpful votes


Check the owners manual or the manufacturers website for error codes. However, it sounds like the control board is bad.
Good luck...

KitchenAid... | 46 views | 0 helpful votes


Assuming it’s electronic lock and not manual, problem would either be lock motor, control board or latch not lining up.

KitchenAid... | 77 views | 1 helpful votes


Most likely bad control, but Check for loose wire connections on control.

KitchenAid... | 63 views | 1 helpful votes

Not finding what you are looking for?
KitchenAid Logo

2,219 questions posted

Ask a Question

Usually answered in minutes!

Top KitchenAid Kitchen Ranges Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

wp4eld1

Level 1 Expert

21 Answers

gbob59

Level 3 Expert

3063 Answers

Are you a KitchenAid Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...