KitchenAid Logo

KitchenAid Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 2K Products
  • 86K Answers

Some refrigerators are designed to cycle through the settings. If you continue to press the down switch it may cause the numbers to reach the bottom set number then go back to the highest number and start the cycle over. If so then all you will need to do is continue to press it until it gets to the desired number. That is how LG and Kenmore work at least on the models I have worked with..

KitchenAid... | Answered on Aug 01, 2020

Cut the power overnight.

In some cases, hold the power button when you switch back on.

Or, this

Control Panel Reset When powering down the unit and turning it back on doesn't work, it may be best to reset the control panel's computer. This is done by pressing two buttons, one after the other, at least five times each for a total of 10 presses. The door must be completely shut while the buttons are being pressed.Apr 20, 2018

The Reset Sequence for a KitchenAid Dishwasher ' Hunker

KitchenAid... | Answered on Jul 29, 2020


I am sorry to hear you are having issues.

I have added links below for the coupler sets we do for your model and a useful video to remove your old coupler:

KitchenAid... | Answered on Jul 17, 2020


I have added some links below for the coupler sets we do for your model.

I have also added a useful video on removing your old coupler if this has not already been done.

I hope this helps!

KitchenAid KSB5... | Answered on Jul 17, 2020


I have added a link below for the Glass Jar for your model:

KitchenAid KSB5... | Answered on Jul 17, 2020


I am sorry to hear you broke your glass jar.

I have added a link below for the glass jar for your model

KitchenAid... | Answered on Jul 17, 2020


I am sorry to hear you are having trouble trying to locate a blender blade assembly for your model.

Please see the links below for the KitchenAid blender blade and our Univen blender blade that we sell that will fit your machine.

I hope this helps!

KitchenAid... | Answered on Jul 17, 2020

My wife has the same model and the planetary unit fell off shortly after we bought it. Since we had moved overseas to a remote pacific island, getting it fixed under warranty was out of the question.

Since the rotary unit is a pressue fit, I pressed it back into place and it worked fine for about 3 months before I had to repeat the process. After that it became a monthly ritual.

I finally decided to fix it for good. What I did was drill a 3/8" hole in the center of the nub in the middle of the inverted rotary cover plate. I then drilled a 5/16" pilot hole in the center of the grooved shaft that the rotary cover plate presses onto. I then tapped that hole with a 18 NC tap. I was careful to tap it just a little shy of the depth of the cap screw that I was going to insert into the threaded hole so that it would jam as I tightened it. I then greased all the gears with a white machine grease and pressed the roary cover plate back onto the shaft. I then put a washer on a 5/16"-18 x 1" socekt head cap screw and clamped the thing together. It hasn't come off in the last 2 years.

While I am moderately skilled in this sort of thing it wasn't a precision operation. Since I was living in a fairly remote location with no shop, I did the entire operation on the kitchen counter using a handheld electric drill. Probably the hardest part was determining how deep to tap the shaft. I did it by trial and error. You can adjust the depth by using a washer or two of varying thicknesses.

I'm really surprised how lame a design using a press fit for this assembly is. They could easily prevent the problem by using my approach or even putting a cotter pin through the shaft and reciever tube in the rotary cover plate (a small hole would be needed in the side of the tube to set the cotter pin).

From what I've seen on the internet while looking for a solution, this is a fairly pervasive problem.

We thought we were buying a high quality machine that we thought would be reliable in our remote situation. Fortuantely, other than the falling rotary cover issue, the machine has worked great.

KitchenAid Food... | Answered on Jul 14, 2020

KitchenAid KFP350WH Food Processor - Parts Warehouse > KitchenAid-KFP350WH-Food-Processor-s
KitchenAid KFP350WH Food Processor Parts and Accessories. ... Repair Parts List WPL-LIT4176952 ... 11. Overlay, Front Panel (KFP350 Model) WPL-4176387

Food Processors Parts ' KitchenAid > countertop-appliances > food-processors > parts
Find the parts you need for your small, medium and large food processor models from KitchenAid.

KitchenAid: Model KFP350WH Parts & Repair Help ' Repair ... > Shop-For-Parts > Model-KFP350WH-Kitchen...
We have manuals, guides and of course parts for common KFP350WH problems. ... KitchenAid Overlay, front panel (kfp350 model). Genuine OEM Part ...

KitchenAid Food Processor Parts ' Fast Shipping ... > kitchenaid-food-processor-parts-c-114...
KitchenAid Food Processor parts that fit, straight from the manufacturer. Use our interactive diagrams, accessories, and expert repair help to fix your KitchenAid ...

Kitchenaid Food Processor Replacement Bowl for sale ' eBay > Kitchenaid-Food-Processor-Replacement-Bowl
Results 1 - 16 of 16 - KitchenAid Food Processor WORK BOWL Replacement Part Model ... Kitchenaid Food Processor KFP350 Replacement Small Work Bowl.

KitchenAid Food... | Answered on Jul 10, 2020

the latch the hooks into the door is caught inside the slot where it locks into when in self clean,you have to move the latch,unplug it,look through the air vents or slots up above the door if you can get a screw driver in there try to move the latch or if you can get something down inside to move the latch,i used a plastic long wire tie to do this before,i slid the tie down around the metal hook part of the latch that locks into the door,and pulled it to the left and got the door to open,it got hung up in the hole and the door wouldn't open but what ever works you have to move the hook part of the latch to get the door open,you can try picking up on the door to see if you can get it open or you'll have to pull the oven out and take the top off to get at the latch,hope this helps

KitchenAid Ovens | Answered on Jul 04, 2020

"Anonymous" reply was HUGELY helpful, got my unit running again. Thanks for taking the time to write that up!!

KitchenAid 23... | Answered on Jul 04, 2020

The rocks and glass has probably slowed or jammed the pump motor. I would remove the pump completely and test it. You may need a new one, they are £200!

KitchenAid Dishwasher Model KUDS01DJSS0 Parts: Fast ... > Shop-For-Parts > Model-KUDS01DJSS0-...
User manual>. >KUDS01DJSS0 Manual. KitchenAid Dishwasher Model KUDS01DJSS0 Parts. KitchenAid Dishwasher Mounting Bracket > · Mounting Bracket ...

KUDS01DJSS0 KitchenAid Dishwasher Parts & Repair Help ... > Models > KUDS01DJSS0
Get Parts, Repair Help, Manuals and Care Guides for KUDS01DJSS0 KitchenAid Dishwasher. View parts like Mounting Bracket and Door Balance Link Kit.

KitchenAid KUDS01DJSS0 dishwasher parts ' Sears Parts ... > model > kitchenaid-kuds01djss0-dishwas...
KitchenAid KUDS01DJSS0 dishwasher repair and replacement parts. Search parts in this model. Go ... KitchenAid KUDS01DJSS0 fill and overfill parts diagram.

KitchenAid... | Answered on Jun 29, 2020

This is a recurring problem with certain KitchenAid ranges. I have a 15 year old dual fuel 36" range and have replaced the temp sensor twice, and now it has gone out again. $8,000 piece of junk the oven has been used. RARELY in 15 years.

KitchenAid... | Answered on Jun 21, 2020

what do you mean by "slip"
the blades quit turning?
or slow down?
or lose power?
or out of alignment?
in other words how do you know they are "slipping"?

KitchenAid Food... | Answered on Jun 10, 2020

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top KitchenAid Experts


Level 3 Expert

85239 Answers

Cindy Wells

Level 3 Expert

6136 Answers

Brad Brown

Level 3 Expert

18402 Answers

Are you a KitchenAid Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides