Kicker Car Audio & Video - Page 3 - Recent Questions, Troubleshooting & Support

that amp has Fail-Safe Integration Technology. i would recommend a 100amp large plastics case glass fuse. install closes to the battery red terminal

Amp is done it can be repaired if you choose to fork out that cost .

Unfortunately its done.

If going sealed I would aim somewhere in the 1.5 to 2.0cuft area. That sub can go in a 1.0 cu ft box to 2.4 depending on the room you he the bigger is usually better for sound quality

It can but it'd be a waste for your subs. 1 of those by itself will handle that amp. it'll push them just not really hard, i'd recommend an upgrade to a 1100-1200 watt rms amp if you're gonna run 2 cvx's. if you only run one sub that amp'll work well...

First, that amp, has too much power for that sub. Even though it isn't really outputting 2500 watts, (realistically putting out 650 watts). That sub is only rated to handle 150 RMS, 300 Peak, 1000 watts will blow that sub very quickly.

First thing you need to do is find a sub which better matches the output of your amp.

The second thing, you need to make sure that your vehicle's electrical system is able to handle the additional current draw.

Address these things before you install your gear.

I've been a 12v installer for going on 28 years

I got this free Pdf manual from reliable-store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the 20 times I fixed the chipper in these 4 yearsmust try this bitman and reliable-store. Both are good

https://youtu.be/sLlFpB0bzOQ

Three times its volume so 4ft^2

I don't have a schematic but I have photos of that amp. What part do you need to identify?

[email protected]

Kicker CK8

Are they single voice coil. Is the amp 2 ohm stable?

You have loose wire connection or connections.