Kenwood Computers & Internet - Answered Questions & Fixed Issues
Kenwood dnn990hd wifi doesn't work
How this unit accesses the Internet is via a smart phone you provide that is in Portable Wi-Fi HotSpot Mode. After setting your phone up to serve as a HotSpot, do setup the Kenwood dnn990hd wifi's wifi as you would a smart phone's wireless connection. If you need more instructions on how to the above, please provide the make and model of your smartphone, as the navigation to the settings have changed from version to version in Android and other OS's are just plain different altogether!~
7/12/2019 7:16:47 PM •
on Jul 12, 2019
F3 error code kenwood 04 ton ac
The Possible Causes of the errors are:-
Wiring Mistake or Wiring Problem
Bad Sensor or not work properly
Bad PCB Board on your ac
The PCB computer board that controls a mini split is having a problem seeing the correct voltage from the sensors it uses.
The wiring and many sensors need to be checked to see if they are malfunctioning.
Indoor room temperature sensor.
To troubleshoot a unit the location of the many sensors will need to be known.
This information can be found in the manual for the unit and depending on the manufacturer may be available from their website.
It is also possible that the PCB board has gone bad.
If after testing all the sensors and wiring and they show good this usually points to a bad PCB board.
Another thing that can cause problems is a unit wired wrong or wiring that has a short or open.
Most often these errors require a technician and will be outside the average home DIY job.
7/6/2019 9:09:54 AM •
on Jul 06, 2019
Hi Marty, ..ok, baring anything else acting up, like a airplane before take off , if the audio was working then and not now , you have probably over looked something in pre flight, check all antenna connections, check the external spkr jack your plugged in to , check all buttons, make sure your on a real ch#, check your squelch adjust. and if you changed mikes , make sure its wired correctly for the radio, if there is any other possible human error it's unknown to me. nice radio...gd luck to you...
12/17/2017 9:36:28 AM •
on Dec 17, 2017
How to get a symmetric
You can't do that because it's not a split supply. There's just a single output referenced to ground, so all you can get is one voltage at whatever you select from 0 to 36 volts.
8/1/2011 6:21:05 PM •
on Aug 01, 2011
CAN NOT GET BELOW 10 VOLTS
Make sure you have SOME load on the supply.A supply of this capabilty will often have SOME leakage current so a small load might be required.
This is a wide range supply and MAY have a switching pre-regulator followed by a pass regulator. It may be this pass regulator has shorted the transistor.
If the minimumj load doesn't pull it down, service is required and schematic will be imperative.
11/16/2009 2:07:29 AM •
on Nov 16, 2009
Need user manual for Kenwood power supply PD56-6D
I could not find it free(the manual) but if you want to buy one ($23) it is available here. Hope this helps.
3/29/2009 2:16:53 PM •
on Mar 29, 2009
My Windows 10 touchscreen computer is frozen
I would try turning it off for 5 minutes and turn it back on to see if it will work again. If it still is not working there could something wrong with your computer and your touch screen that will need to be repaired from someone that fixes computers.
10/16/2021 6:51:35 AM •
2 hours ago
What does quantitative observation mean
Quantitative observation, also called quantitative data, includes information that includes numbers, measurements, and statistics. Quantitative data serves as a tool to measure data in many areas, including algebra in mathematics. Quantitative data complements the use of qualitative data, which uses descriptions, adjectives, and linguistic elements to describe objects and images.
10/14/2021 6:41:17 PM •
How to Setup : Alexa Not Working With Roomba?
When you are Set up Alexa with Roomba then you will need to set up the Wi-Fi network connection. Now the following step to solve the Alexa Not Working With Roomba
Firstly you are required to launch the iRobot software.
After now, click on the setting option on the top left corner on Alexa
Select the Smart home options there.
Now open you need to select the link account options.
This is a process with the help of Alexa App so please first process you need to install the Aplexa Applications.
Last process press the ink button and complete the process to send to the iRobot back.
10/14/2021 6:52:32 AM •
2 days ago
Not finding what you are looking for?