Kenwood Radio Communications - Recent Questions, Troubleshooting & Support

Hi Carter,

All is good for you here, the answer is yes to cloning, but you will need the software and cables to do so, if you haven't already got this.

If you do require software and cables, ebay is the best and often cheapest way of getting this gear. look under Electronics, Radios, and follow the links to Parts & accessories.

Failing that, join yahoo group SPECIFIC to you radio Make/Model, the expert team there will give you all the info you need, plus you can download manuals, schematics and software free.

I hope this is the news you've been waiting for.


Kenwood TK-3230... | Answered 2 days ago

1. Open fuse
2. Defective switch

Kenwood Radio... | Answered on Jul 13, 2020

Kenwood Radio... | Answered on Apr 14, 2020

SORRY but FIXYA has no clue as to who can do this , even if it costs both arms .

Kenwood PB-34M,... | Answered on Mar 11, 2020

Search on ebay and see if anyone selling some of these would photocopy the manual for you for a fee.

Kenwood FreeTalk... | Answered on Mar 06, 2020

First, clean all the connectors associated with this board. Over time they can get corrosion built up on them and they stop conducting. Use De-OXIT or Isopropyl alcohol to clean them. You may have to clean the deviation control on the board or replace C* and C10. I doubt if the microphone amplifier, Q1, is bad but if you can check the voltages around it, that might give you a clue. This problem shouldn't be too hard to fix as the rest of the radio is working. Good Luck!

Kenwood Radio... | Answered on Nov 13, 2019

Took me 6.5 seconds to find. Really, are you even trying?

Kenwood Radio... | Answered on Nov 12, 2019

You can connect it to the MIC input through a 10K resistor. That's the easy way. has a better method. Go to this website and look for the TR-9130 area and you'll find several files.

Kenwood Radio... | Answered on Nov 10, 2019

White is usually the audio wire. Black is ground and red PTT. The shield goes to the mic ground connection. The pinout is in your TS-440 manual.

Kenwood Radio... | Answered on Nov 10, 2019

It may be an out of market radio, meaning from another country. Most cannot be programmed to USA frequencies. It may be a frequency not allowed in that model. You did not list a frequency, you have a Uhf radio, it can only be programmed for Uhf, business band channels and a few others, like manufacturing or shared emergency channels. more information please.

Kenwood Radio... | Answered on Oct 04, 2019

That radio is past the end of life support and parts cannot be gotten. The older units had issues with chips in them that control the tuner and generate signals, the chips are custom made for Kenwood. You may be able to sell it on EBAY for parts.

Kenwood Radio... | Answered on Sep 27, 2019

See Service Manual PAge 11, if your problem not splve then remove R404 and see result, it will be OK.

Kenwood Radio... | Answered on Aug 07, 2019

well, first time i installed mine i didnt plug the mic in all the way. it seems like it's in but ti's not, you have to give it an EXTRA push. try that.

Kenwood... | Answered on Jul 13, 2019

I installed this software and working fine, what is your problem with this software. It is running at windows XP. You select the model of radio to which you want the program.

Kenwood Kpg-56d... | Answered on Jul 11, 2019

Because your Radio is not power up so you have must change the EEPROM of your radio from Radio Service Shop, because your old EEPROM all data erased. Normally during update failure this not happen and Radio powerup, only programming of radio erase and LCD show no program and thid fault can be rectify when again updating process run, but your problem is not like that, your radio is not powerup, so you need to change EEPROM then your problem will be solve

Kenwood Radio... | Answered on Jul 11, 2019

KPG-135d is programming software and reprogram your radio within frequency range of 136 to 174 MHz.

Kenwood Kpg-135d... | Answered on May 31, 2019 From above link you can benefitted, because it is general full information for glocom user.

Kenwood Radio... | Answered on May 28, 2019

Not finding what you are looking for?
Kenwood Logo

723 questions posted

Ask a Question

Usually answered in minutes!

Top Kenwood Radio Communications Experts


Level 3 Expert

1658 Answers


Level 3 Expert

85239 Answers

Lawrence Oravetz

Level 3 Expert

10548 Answers

Are you a Kenwood Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides